Morphy Richards 47160 manual Descaling - espresso, Descaling - filter coffee, Contact us, Helpline

47160 rev3_Layout 1 02/09/2011 13:57 Page 8

the Filter Holder clean we recommend you periodically run the machine with the Espresso Filter Holder in place, without coffee, using water only.

Rinse the Filter Water Tank occasionally with cold water. Do not use a cloth as any residue or lint may be left behind to clog the coffee maker.

Should the holes in the Espresso Filter become blocked with coffee grinds, use a fine bristled brush to help clean.

When your coffee maker is not being used, we recommend that you do not leave the Espresso Filter Holder attached to the machine as this will reduce the life of the gasket.

5Wash the Filter Coffee Jug (23), Jug Lid (22), Filter Holder (19) Removable Permanent Mesh Filter

(21) in warm soapy water. Rinse and dry all parts thoroughly. Refit the Filter Holder.

Care must be taken to ensure that the non-drip valve situated on the bottom of the filter holder is not damaged during cleaning.

6Remove the Drip Tray (11) from the appliance and remove any spilt coffee and water then clean them with a damp cloth or a damp sponge.

7You must clean the Steam Wand and cover immediately after each use, after it has cooled

down. Briefly use the steam setting to clear any remaining milk out of the Wand and Cover. Remove the Steam Wand Cover, place under warm running water to remove excess milk. If the Steam Wand becomes blocked, use a small pin to clean more thoroughly.

•WARNING: Steam from the Steam Wand is extremely hot and can scald.

•IMPORTANT: Never wash your coffee machine accessories in a dishwasher.

•Never use harsh or abrasive cleaners.

•NO parts are suitable for cleaning in a dishwasher.

Descaling - espresso

1Disconnect the appliance from the mains supply.

2Make sure the appliance has cooled down completely.

3Remove the Water Tank (13) and Drip Tray (11) from the machine.

4Fill the Water Tank with dissolved citric acid solution, up to the max level marked on the side of the tank.

5Re-fit the Water Tank and Drip Tray to the machine.

8

6Place an empty container under the Brewing Head (3) to gather the descaled hot boiled water.

7Connect the appliance to the mains supply.

8Slide the On/Off button (10) and wait for the Indicator Light (9) to stop flashing.

9Slide the Large Cup Switch (7), water will flow through the unit.

10Slide the switch again, dispensing until the water tank is empty.

11Repeat the process with cold water only to flush the system.

Descaling - filter coffee

•If you live in a hard water area, we recommend that your coffee maker is descaled at regular intervals, e.g. every 2-3 months. In areas of moderately hard water, you should descale every 6 months.

•If the water filters through more slowly than usual, it is a sign that descaling is necessary.

•We recommend you use a proprietary liquid descaler which is especially made for coffee makers and plastic kettles. Follow the instructions on the bottle or sachet, and then operate the coffee maker with just water 3 times before making filter coffee.

•Do not use a kettle descaler unless the packet specifically states it is suitable for coffee makers.

Contact us

Helpline

If you are having a problem with your appliance, please call our Helpline, as we are more likely to be able to help than the store you purchased the item from.

Please have the product name, model number and serial number to hand when you call to help us deal with your enquiry quicker.

UK Helpline: 0844 871 0960

IRE Helpline: 1800 409 119

Spares: 0844 873 0726

Talk To Us

If you have any questions or comments, or want some great tips or recipe ideas to help you get the most out of your products, join us online:

Blog: www.homeofthehouseproud.com

Facebook: www.facebook.com/morphyrichardsuk

Twitter: www.twitter.com/loveyourmorphy

Website: www.morphyrichards.com