Lewmar Complete Guide to Hatch Identification and Seal Replacement

ABCD

Trimline Hatch

Build Dates : The Trimline hatch was made from 1988 until 2000. (check Hatch Identification Table for ranges with overlapping production dates).

Identification : The Trimline had a stainless steal stay that slid in a track in the lower frame. The stay could be locked in pre set positions in the lower frame to hold the lid open.

Notes :	In December 1992 the Trimline was changed to use the Coastline Seal, on hatches
	with the old seal the new seal may be used as a replacement.
	Early Trimports (Sz 03,05,11,41,23,52 & 61) also had stays, replacement parts for
	these hatches are listed under Trimport Spares.
Instructions :	Fitting & Adjustment	B2179 Iss B (2 pages)
	Retro Fit Lock & Key	B5677-B & C
Spares Kits :	Catch blocks	B5520-2
	Stay Kits (Sz 10,30,35,40,50,60 & 70)	B5530-2
	Seal Kits	B5539-2
	Hinge Pins	B5541-1
	Lower Frames	B5542-2
	Lids	B5550-2
	Handle Kits	B5666-2

Accessories : Retro Fit Lock & Key Kit	B5677-3
Inside Handle Both Sides Kit	B5966-B
Trims & Flyscreens