ABCD
Trimport Hatch
(also known as Coastline sizes 00 to 24, 33, 41 and 61)
Build Dates : The Trimport hatch was made from 1991 until 2000 (check Hatch Identification Table for ranges with overlapping production dates).
Identification : The lids open smoothly with Friction Levers for support. These features are shared with the Ocean hatch but the Ocean is at least 40mm high of the deck. The Trimport is only 20mm.
Notes : | Early Trimport hatches had a Trimline type stainless steel stay with a friction slider in | |
| the lower frame to hold the hatch open. Later Trimports used the small friction lever. | |
Instructions : | Fitting & Adjustment | B4050 Iss B (2 pages) |
| Retro Fit Lock & Key | |
Spares Kits Mk.1 & 2 Common Parts : |
| |
| Catch blocks | |
| Seal Kits | |
| Hinge Pins | |
| Handles | |
Spares Kits Mk.1 (with stay) : |
| |
| Lower Frames (stay version) | |
| Stay Kits Sz 03,05,11,41 & 23 | |
| Stay Kits Sz 52 & 61 | |
| Lids (stay version) | |
Spares Kits Mk.2 (with friction lever) : |
| |
| Lower Frames (friction lever version) | |
| Small Friction Levers | |
| Lids (friction lever version) | |
Accessories : Retro Fit Lock & Key Kit | ||
| Inside Handle Both Sides Kit |
Trims & Flyscreens