______________________________________________________________________________________________________

HATCH & PORTLIGHT PRODUCT MARKING & DATE CODING

All Lewmar Hatches and Portlights (except old Standard) produced since October 1997 have had identification information stamped on the acrylic. On Portlights and Fixedlights the information is under the αβχδ branding. On hatches the information is between the right hand handle and the edge of the acrylic.

The information is:-

1) Range Name & Hatch Size

For Hatches; Ocean, Coastline, Trimport, Trimline or Concept

For Portlights; Standard (New Standard only), Atlantic, Ocean or ASTAR (Hallberg Rassy only)

Or

A number in the form "399SSXR" for example 3996003 where:-

SSis the hatch size, in the example Size 60

Xis the acrylic colour as per Table X in the spares book, in the example 0 for grey R is the Range, 3 is Low Profile, as in the example, and 2 is Medium Profile

On Mark 2 Low & Medium Profile hatches the number is preceded by and “A” for example “A3996002

Or

A number in the form "300XXX" for example 300380. This is the first 6 digits of a hatch or portlight custom product part number, in this case it would be 300380000

3) The date

In the from "DDMY" for example 11J7 where;-

The letter code for the month is:-

A = January

B = February

C = March

D = April

E= May

F= June

The letter I "India" is not used

11 is the eleventh day of the month J is the month of September

7 is the year 1997, the year 2000 will be 0.

G = July

H = August

J = September

K = October

L = November

M = December

Box Label

The bar code label on the box also contains a date code in the form 9739 where:- 97 is the year

39 is the week of the year

White Sticky Label On Alloy Frame

The white sticky label is from our anodising sub-contractors. It is in the form "100E 5", where:- 100 is the 100th day of the year

E is the year 1997 (1998 will be F)

5 is an code for additional production information

Date Code Stamped Into Alloy Frame

The Lewmar date code is stamped under the lid extrusion and is in the same form as the date code outlined above for the acrylic stamping

Page 2
Image 2
Lewmar Issue 2 warranty Hatch & Portlight Product Marking & Date Coding