Oreck XL2605HH, XL2205RH warranty How to Replace a Worn Belt To Adjust or Replace Brush

Page 6

How to Replace a Worn Belt

WARNING: Unplug cord from electrical outlet before servicing.

To Adjust or Replace Brush

WARNING: Unplug cord from electrical outlet before servicing.

Remove the replacement belt from the storage channel.

Remove the door by removing the hold down screw located on side of power head.

Slide the door forward by prying open with a screwdriver or coin.

Remove the belt from the brush roll pulley and the motor drive shaft.

Loop the new belt over the motor drive shaft. Place the opposite end of the belt on the brush roll pulley.

Rotate the brush roll three

Rotate and match

bearing assemblies

To determine if the brush is worn, place a firm straight edge across the nozzle opening. If brush bristles do not extend beyond baseplate, brush should be adjusted.

Remove the baseplate by removing 5 screws. Then, remove the belt and brush roll from the housing.

Rotate both bearing assemblies at ends of brush roll to show “OLD” and replace in the holding channels in the housing.

NOTE: The bearing assembly setting marked “OLD” has a smooth side. The one marked “NEW” has notches. When rotating bearings, make sure both bearing assembly settings are the same and face up when replacing the brush roll.

Reassemble the belt and the baseplate and check bristle height above baseplate at each end of brush.

(3) complete revolutions to ensure that no part of the belt is overhanging the end of the motor drive shaft.

Replace the door by sliding it into the groove at the bottom of the housing. Replace the hold down screw.

IMPORTANT: Unless the brush is worn as indicated above, both bearings must be in the “NEW” position. When rotating, both bearings must be in the “OLD” position. Unmatched settings will cause damage to your machine.

If a previous adjustment has already been made and bristle height does not extend above baseplate, a new brush assembly should be ordered.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents XL2605HH XL2205RH Table of Contents 0845 603 Maintenance Customer ServiceWarranty Or write to Oreck UK P.O. Box 201 Exeter DevonAssembly To Replace Paper Filter Dust Bag XL2605HH Dust seal will close automaticallySlide the cardboard collar completely onto bag dock door Operating Instructions How to Replace a Worn Belt To Adjust or Replace Brush Intake Opening Retainer Spring Fan Housing Ring Stuffing or BlockageTroubleshooting Guide Save Service CALLS...CHECK These First

XL2205RH, XL2605HH specifications

The Oreck XL2205RH and XL2605HH are two of the most popular upright vacuum cleaners from Oreck, a brand renowned for its lightweight and durable cleaning solutions. Both models are designed to deliver powerful and efficient cleaning performance, specifically targeting the needs of homes with various floor types.

One of the standout features of the Oreck XL series is its lightweight design. Weighing approximately 8 pounds, both the XL2205RH and XL2605HH are easy to maneuver and carry, making them suitable for users of all ages. This portability allows for effortless cleaning across multiple levels of a home without feeling burdened or fatigued.

Powering these models is a high-speed roller brush, which spins at an impressive rate to dislodge dirt and debris from carpets and upholstery. This cleaning system is complemented by Oreck's proprietary Saniseal technology that ensures dirt and dust are contained within the vacuum bag, preventing leaks and puffbacks. The high-capacity vacuum bags are also easy to replace, offering a mess-free experience when it's time for a change.

Another critical feature of the Oreck XL2205RH and XL2605HH is their versatility. Equipped for both carpets and hard floors, they can easily transition between different surfaces, ensuring a comprehensive clean throughout the home. Additionally, the models include a choke-style floor selector that allows users to switch easily from one surface type to another without any hassle.

The XL2605HH model brings an extra layer of convenience with its hypoallergenic bags and advanced filtration capabilities. This feature is especially beneficial for allergy sufferers, as it helps trap allergens and dust particles, contributing to a healthier indoor environment.

Both models also come with a variety of attachments, such as a crevice tool and dusting brush, perfect for reaching tight corners and cleaning delicate surfaces. The quick-release handle also allows for easy storage and accessibility.

In summary, the Oreck XL2205RH and XL2605HH models embody a blend of lightweight design, powerful suction, and versatile cleaning options. With their user-friendly features, advanced technology, and commitment to maintaining a clean and healthy home, these vacuums stand out in the competitive market, providing an ideal solution for various cleaning needs.
Top Page Image Contents