Oreck XL2205RH, XL2605HH Stuffing or Blockage, Intake Opening Retainer Spring Fan Housing Ring

Page 7

Stuffing or Blockage

Under certain conditions it is possible to stuff or block the intake tube and the lower tube assembly. If your vacuum cleaner does not pick up properly, or makes unusual noise and the outer bag does not fluff up or balloon open, follow the following steps:

WARNING: Unplug cord from electrical outlet before servicing.

5.Many times blockage occurs due to a full dust bag causing dirt to back down the air flow system. When that happens, the blockage will be at the top of the system, starting in the area where the dust bag connects to the connector assembly. See illustration F.

F

Connector

Deflector

Opening

A

Intake Opening

BIntake Opening

Retainer

Spring

C

Fan

Housing

O-ring

D

E

1.Check for blockage at the mouth of the intake opening. See illustration A. If there is blockage, remove it with long-nose pliers, a screwdriver or coat hanger. If you can not reach the blockage, remove baseplate. See illustration B.

2.If the blockage is not at the base, remove lower tube. See illustration C. Unhook retainer spring, releasing bottom of bag. Twist lower collar counterclockwise to slide up. Pull tube out of base. Check for blockage. If blockage is in the tube, remove with a coat hanger.

3.If tube is not blocked, look into fan housing. See illus- tration D. Remove debris with long-nose pliers, a screwdriver or coat hanger.

4.To reassemble, check O-ring on tube, and replace if damaged. Vacuum will not operate properly without the tube O-ring. Slide O-ring to approximately 2" from base of tube. Replace tube by first lining up slot at base of tube with inner tab inside fan housing. Then reinsert tube and push down until the tube is seated. Make sure O-ring is in place against fan housing opening. Replace and tighten collar until collar locking tabs are locked in place. See illustration E. Make sure collar is not cross threaded on housing.

NOTE: If the “Stuffing or Blockage” actions do not correct the problem, contact an ORECK authorized service center or call the customer service center at: 0845 603 0153.

IMPORTANT: On plush and new carpets, stuffing may occur due to excessive fuzz and loose cuttings in the carpet. Stuffing could occur for the first few cleanings until all the loose material is removed. Due to the high efficiency of the cleaner, many older carpets will cause stuffing when the cleaner is first used on them.

Using An Oreck Fresh Air® Tab

Your ORECK XL vacuum cleaner has a special Oreck Fresh Air® tab pocket. This pocket is located inside the outer bag in the area where the disposable paper bag attaches to the intake tube. Insert tablet in pocket.

7

Image 7
Contents XL2605HH XL2205RH Table of Contents Or write to Oreck UK P.O. Box 201 Exeter Devon Maintenance Customer ServiceWarranty 0845 603XL2605HH Dust seal will close automatically Assembly To Replace Paper Filter Dust BagSlide the cardboard collar completely onto bag dock door Operating Instructions How to Replace a Worn Belt To Adjust or Replace Brush Stuffing or Blockage Intake Opening Retainer Spring Fan Housing RingSave Service CALLS...CHECK These First Troubleshooting Guide

XL2205RH, XL2605HH specifications

The Oreck XL2205RH and XL2605HH are two of the most popular upright vacuum cleaners from Oreck, a brand renowned for its lightweight and durable cleaning solutions. Both models are designed to deliver powerful and efficient cleaning performance, specifically targeting the needs of homes with various floor types.

One of the standout features of the Oreck XL series is its lightweight design. Weighing approximately 8 pounds, both the XL2205RH and XL2605HH are easy to maneuver and carry, making them suitable for users of all ages. This portability allows for effortless cleaning across multiple levels of a home without feeling burdened or fatigued.

Powering these models is a high-speed roller brush, which spins at an impressive rate to dislodge dirt and debris from carpets and upholstery. This cleaning system is complemented by Oreck's proprietary Saniseal technology that ensures dirt and dust are contained within the vacuum bag, preventing leaks and puffbacks. The high-capacity vacuum bags are also easy to replace, offering a mess-free experience when it's time for a change.

Another critical feature of the Oreck XL2205RH and XL2605HH is their versatility. Equipped for both carpets and hard floors, they can easily transition between different surfaces, ensuring a comprehensive clean throughout the home. Additionally, the models include a choke-style floor selector that allows users to switch easily from one surface type to another without any hassle.

The XL2605HH model brings an extra layer of convenience with its hypoallergenic bags and advanced filtration capabilities. This feature is especially beneficial for allergy sufferers, as it helps trap allergens and dust particles, contributing to a healthier indoor environment.

Both models also come with a variety of attachments, such as a crevice tool and dusting brush, perfect for reaching tight corners and cleaning delicate surfaces. The quick-release handle also allows for easy storage and accessibility.

In summary, the Oreck XL2205RH and XL2605HH models embody a blend of lightweight design, powerful suction, and versatile cleaning options. With their user-friendly features, advanced technology, and commitment to maintaining a clean and healthy home, these vacuums stand out in the competitive market, providing an ideal solution for various cleaning needs.