Using the Basics |
Chapter 2: Using the 24-Button Digital Phone
Using the Headset
Once you set the headset mode, you can toggle between the handset and the headset in the same way you toggle between the handset and speaker (see “Switch between Handset and Speaker” on page
Press SPEAKER to toggle between using the handset and the headset.
Adjusting the Volume on the Headset
While on a call:
Use the VOLUME down
Using a Headset with a 2.5 mm Headset Jack (Ear/Mic)
If you are using a special headset that has a 2.5mm headset jack, (that is Ear/Mic units) a special setting in addition to the basic Headset Mode setting is required.
Note: Contact your System Administrator to find out if the headset you are using requires this additional setting.
Follow the steps 1 through 6 for Setting the Headset Mode.
7. | Use | on the Nav Button to |
|
| |||
| access the Programming | 1. BASIC PROGRAM | |
| Menu. |
| 2. ADVANCED PROGRAM |
8. | Use | on the Nav Button to | OK |
| |||
| scroll to the ADVANCED |
| |
|
| ||
| PROGRAM option. |
|
9.Press the OK soft button to select the ADVANCED PROGRAM option.
10.Use on the Nav button to scroll through the options. When you see the EAR/MIC PROGRAM option:
11.Press the OK soft button to select the option.
5. EAR/MIC PROGRAM
BACKOK
(continued on next page)
SBX IP 320 Phone User Guide