
Chapter 2: Using the 24-Button Digital Phone
Parking
There are two ways that Park can be set up on your system. Contact your Administrator to find out if you have the following.
•System Park
•Park and Page
System Park
You can place a call in a “parking slots” available on the SBX system for retrieval from another phone.
Example: A call may come in for someone in your group. However, that person is somewhere else in the building. You can park the call, then page the person with the parking location/slot number. That person can then retrieve the call from any phone in the system by dialing the park location you provided.
Note: Contact your System Administrator for details about the available parking slots, and/or if you are unsure if this feature is available on your phone.
To Park a Call
While on an active call:
1.Press TRANS/PGM, then dial the Park location/slot number (601through 608).
2.Hang up.
Hint: Remember the location at which the call is parked as you need it to retrieve the call.
To Retrieve a Parked Call at Any Station
1.Lift the handset, or press SPEAKER.
2.Dial the Park location/slot number to be connected with the caller.
Note: The time a call can remain parked is limited. If parked call exceeds this time limit, the call will ring back at the station that parked the call. If the call is still not retrieved it will route to the Automated Attendant, then it will be disconnected if not retrieved from there.
SBX IP 320 Phone User Guide