444 After holding and pulling out the top of Freezer Door, remove it at the rail system.
Make sure there is no scratch at the end of cAuTION Sliding Rail by being dented from the floor.
Make sure that you mount the freezer cAuTION basket in the right position when removing
/installing the freezer door. Failing to do so may result in the door not opening or closing properly.
How to adjust the level
111 Open the freezer drawer and remove the lower basket.
222 Insert a
Both control levers must be touching the cAuTION floor to avoid possible personal injury or
property damage because of tipping.
If the right side is lower, perform the same procedure, but with the right control lever.
It is difficult to remove the cover leg front from the refrigerator, so we do not recommend making small adjustments with the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors.
up 01setting
Assemble the freezer drawer
To reattach the drawer after you have moved the fridge to its final location, assemble parts in reverse order.
Adjusting the Level
Make sure the refrigerator is level so that you can make final adjustments. Use a level to test if the refrigerator is level both side to side and back to front. If the refrigerator is not level, it will not be possible to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how to level the refrigerator if the left side of the refrigerator is lower than the right side.
Making minor adjustments between doors
Remember, a leveled refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the refrigerator.
| Adjustment |
Fixed part | part |
|
The left door is fixed. To make minor adjustments between doors, adjust only the right door.
setting up _09
2012.3.31 9:49:42AM