Samsung RF263NC Operating your French Door Refrigerator, Using the control panel, operating

Operating your French Door Refrigerator

Using the control panel

	8
1	4
2	5
3	6
	7

( 1 ) Energy	Touching this button turns Energy Saver
Saver	mode on and off. When you turn Energy
Hold 3 sec for	Saver on, the Energy Saver icon lights.
°C↔°F	Turn Energy Saver off and the icon
	goes off. The Energy Saver function
	automatically turns on when power is
	supplied to the refrigerator.
	If condensation or water drops appear
	on the doors, turn the Energy Saver
	mode off.
	Touch and hold this button for 3
	seconds to switch the temperature units
	between °C and °F.
( 2 ) Freezer	Touch this button to set the freezer to
(Hold 3 sec	your desired temperature.
for Power	You can set the temperature between
Freeze)	-8°F and 5°F (between -23°C and
	-15°C). Touch and hold this button for 3
	seconds to decrease the time needed
	to freeze products in the Freezer. It can
	be helpful if you need to quickly freeze
	easily spoiled items or if the temperature
	in the freezer has warmed dramatically
	(For example, if the door was left open).
( 3 ) Ice	Touch this button to select the ice or
Type/Water	water function. You can select water or
Hold 3 sec for	the types of ice(cubed/crushed ice).
Filter Reset	Each time you press the button, the
	cubed and crushed
	ice modes alternate and the Cubed or
	Crushed ice icon lights up, indicating
	your selection.
	After you replace the water filter, touch
	and hold this button for 3 seconds to
	reset the water filter life indicator.

12_ operating

( 4 ) Alarm	To turn the door open alarm on and off
Hold 3 sec for	If the door alarm is set to On, an alarm
Lighting	beeps if any refrigerator door is left open
	for more than three minutes.
	The beeping stops when you close the
	door. The door alarm function is preset
	to On in the factory. You can turn it
	off by touching and then releasing this
	button. You can turn it back on in the
	same fashion. The icon lights up when
	the function is on.
	If you touch and hold the Alarm/Lighting
	button for 3 seconds, the dispenser LED
	Lamp will stay on.
( 5 ) Fridge	Touch this button to set the fridge to
Hold 3 sec for	your desired temperature. You can set
Power Cool	the temperature between 34°F and 44°F
	(between 7°C and 1°C). Touch and hold
	this button for 3 seconds to decrease
	the time needed to cool products in
	the Refrigerator. It can be helpful if you
	need to quickly cool easily spoiled items
	or if the temperature in the fridge has
	warmed dramatically (For example, if the
	door was left open).
( 6 ) Ice Off	If you don’t want to make more ice,
Hold 3 sec for	touch the Ice Off button.
Child Lock	Touching this button for 3 seconds turns
	on Child Lock which locks the display
	panel and dispenser buttons so the
	buttons can not be used. The Child Lock
	icon lights up to indicate you’ve activated
	the Child Lock function. Press 3 seconds
	to unlock.
( 7 ) Ice Off	If you don’t want to make more ice,
	touch the Ice Off button.
	The icon will light up and the Ice-Maker
	stops making ice.
	We recommend you to stop ice
	making if the following occur:
	- There is enough ice in the ice bucket.
	- You want to save water and energy.
(RF263T**)	- Water is not being supplied to
	the refrigerator.
	If the ice maker function is
	ON, and the water Line is not
	connected, there will be a water
(RF263B/N**)	valve noise from the back of the
	unit, press the Ice Off (Hold 3sec
	for child lock) button for less
	than 3 seconds until the Ice Off
	Indicator (	) illuminates.

DA68-02601A(EN+FR+ES)-0.2.indb 12

2012.3.31 9:49:44AM