DeWalt SBX IP 320 manual Selecting a Forward Type, When Entering an OFF-NET Destination

Using Features and Functions	4-11
	Chapter 4: Using a Single Line Telephone (SLT)

When Entering an OFF-NET Destination:

•Enter a telephone number and include access and area codes where applicable.

•Enter a station (000 to 099) or system (2000 to 2499) speed bin number.

Selecting a Forward Type

After you access the Call Forward Option (see steps 1 through 3 in “Overview of Call Forwarding Calls” on page 4-10):

0 = FOLLOW-ME FORWARD

From any phone in the system, you can specify an extension to which you want your calls forwarded. Once you enter the destination number, you will be prompted for your password.

1.Press 0 for Follow-me Forward.

Example: You go to work in a lab room and want all calls forwarded to that room, but have forgotten to set the forward prior to leaving your office. You can pick up the phone in the lab and set it for the Follow-me forward. All calls to your office phone will then ring in the lab (until you cancel the setting).

2.Press 0 for FOLLOW-ME FORWARD, then enter the (your) station number from which calls are to be forwarded.

3.Dial the authorization code of the forwarded extension.

Note: The authorization code must be registered before "Follow-Me" Call Forward can be set. Contact your System Administrator for details.

4.Dial the extension number to which you want calls forwarded.

1 = UNCONDITIONAL FORWARD

Have your calls forwarded any time your phone is not answered or busy.

Press 1 for UNCONDITIONAL FORWARD, enter the destination extension, then your password.

2 = BUSY FORWARD

Have your calls forwarded to another destination when your phone is busy (that is, when you are on another call).

Press 2 for BUSY FORWARD, then enter the destination extension.

(continued on next page)

SBX IP 320 Phone User Guide