DeWalt SBX IP 320 Switch between Handset and Speaker, Adjust Speaker Volume, While on a call

2-14 Using the Basics

Chapter 2: Using the 24-Button Digital Phone

Switch between Handset and Speaker

To switch from Handset to Speaker Mode

While on a call:

1.Press the line or SPEAKER.

2.Place the handset on hook to transition the call from the handset to the speaker mode.

NOTE: If you press line or Speaker and you don’t hear the caller (when answering a call) or a dial tone (when making a call), check to make sure that the Headset Mode is not on (see "Using the Headset" below).

To Switch from Speaker Mode to Handset

While on a call:

Pick up the handset to remove the call from speaker mode, and continue the conversation.

Adjust Speaker Volume

You can easily adjust the volume of the speaker during a call.

While on a call:

Use the VOLUME down (-) and up (+) to adjust the volume of the caller’s voice.

Hint: This also works for adjusting the volume of the handset.

(continued on next page)

SBX IP 320 Phone User Guide