To Replace Filter Dust Bag, Belt | Oreck XL2250RS, XL2200RS manual

E N G L I S H

All paper dust bags are not the same. Your ORECK disposable dust bags have been designed to be used with the ORECK cleaner and using bags other than genuine ORECK disposable bags will affect the cleaning ability of your cleaner and could cause damage to it.

The Belt

The belt on your vacuum cleaner controls the speed of the revolving brush and is very important for the effective operation of the cleaner. If the belt becomes stretched or cut, it will cause the revolving brush to stop completely or slow down. See instructions in the manual for replacing belt.

An extra belt is stored in the base plate of your cleaner. When buying replacement belts, use ONLY ORECK genuine belts. Belts other than ORECK belts will not operate the revolving brush correctly and may create undue stress which will cause damage to the motor and brush bearings. Using belts other than ORECK belts will void the warranty.

Lubrication

The vacuum cleaner motor bearings are factory lubricated and seated. Further lubrication is not required.

General Cleaner Care

At least once a month, check for and remove excessive lint, string or hair from revolving brush.

Wipe the outside of the cleaner with a damp cloth. Also clean the connector deflector assembly area, base of cleaner and fan housing area. If there is dust in the outer bag, vacuum it or shake it out.

A little preventative maintenance will keep your cleaner looking new and will ensure continued cleaning effectiveness.

CAUTION—Wood Floors, Soft (Vinyl, Asphalt Tile, etc.) Floor Surfaces and Polished Floor Finishes Use floor and floor finish manufacturer’s recommended methods of cleaning. The metal strip on the base of the cleaner could be damaged if used on concrete or abrasive surfaces, and, therefore, cause damage to wood floors, soft (vinyl, asphalt tile, etc.) floor surfaces and polished floor finishes. The roller brush may also scuff very soft finishes. Do not operate the unit while in the upright and locked position. Do not let the unit run while in any one stationary position for any period of time. Keep the unit moving while in operation.

To Replace Filter

Dust Bag

WARNING: Unplug cord from electrical outlet before servicing.

BAG REMOVAL :

1.Unsnap bag door from base.

2.Gently pull bag from

cardboard collar upwards.

BAG INSTALLATION :

1. Slide the cardboard collar completely onto bag dock door.

2.Firmly push bag dock door with both thumbs on indication point until

it snaps.

XL2250RS, XL2300RS, XL2200RS specifications

The Oreck brand is synonymous with lightweight and efficient vacuum cleaners, and their models XL2300RS, XL2250RS, and XL2200RS exemplify these qualities. These models are built with advanced features designed to ensure effective cleaning while maintaining easy maneuverability.

The Oreck XL2300RS is engineered with a powerful 8-pound design that makes it easier for users to lift and navigate throughout the home. One of its standout features is the SaniSeal Technology, which automatically seals the vacuum bag when it is removed, preventing dust and allergens from escaping back into the air. This model is also equipped with a 102-mile per hour airflow, optimizing its suction power to pick up both large debris and fine dust particles effectively. The XL2300RS includes a durable, hypoallergenic inner bag that captures 99% of particles down to 0.3 microns, making it ideal for allergy sufferers.

Moving on to the Oreck XL2250RS, this vacuum showcases a similar lightweight design, ensuring easy movement even in tight spaces. A unique characteristic of this model is its ability to lay flat, allowing users to clean under furniture and obstacles effortlessly. Additionally, it comes with a side edge cleaning technology that enhances the cleaning power along baseboards and furniture edges. Like the XL2300RS, the XL2250RS also features the hypoallergenic inner bag, ensuring a cleaner home environment.

Lastly, the Oreck XL2200RS continues the tradition of lightweight functionality in the Oreck family. Known for its simplicity and reliability, the XL2200RS includes a 6 amp motor that delivers strong suction to ensure effective cleaning on both carpets and hard surfaces. The model is designed with a High-Speed Roller Brush, which rotates at an impressive 6,500 revolutions per minute (RPM), allowing for maximum dirt pickup. Additionally, this vacuum is designed to reduce strain on the wrist with its ergonomic handle, enabling users to clean for longer periods without discomfort.

In summary, the Oreck XL2300RS, XL2250RS, and XL2200RS models feature lightweight designs, strong suction capabilities, and technologies aimed at maximizing user convenience and cleaning effectiveness. Their hypoallergenic bags and edge-cleaning functionalities make these vacuums ideal choices for those seeking a powerful yet easy-to-use cleaning solution for their homes.