Step | MTX Audio 622CM guide

STEP 1

Using a stud finder (available at low cost at most hardware stores) or other accu- rate method, locate center point between two joists and mark. Using template provided, trace hole pattern on surface of ceiling.

STEP 2

Using a sabre saw, keyhole saw or very sharp utility knife, cut hole in wall, fol- lowing traced pattern.

STEP 3

Run loudspeaker wires to sound source location. There are several methods you can use to accomplish wiring, depending on the construction characteristics of the room or house. You can add a professional touch to your installation by using a speaker terminal plate at the source location. Leave sufficient amount of wire at speaker location (8 to 10 inches) to complete connection.

STEP 4

Attach loudspeaker wires to speaker terminals, observing correct polarity, and position speaker frame up into cutout. Be careful not to pinch wires in the process.

STEP 5

Carefully tighten the four mounting screws. This will cause the mounting wings to rotate out behind the mounting surface and secure the speaker in place.

STEP 6

After speaker panel is secured tightly, test for sound. When you are satisfied the speaker is operational, affix grill. As grill is designed for a snug fit, you’ll need to position one edge into slot first, and press or squeeze around perimeter of grill, while pushing leading edges into grill slot.

622CM specifications

MTX Audio 622CM is a powerful and innovative component speaker system designed for audiophiles and car audio enthusiasts who demand the highest quality sound experience. This 6.5-inch speaker set is known for its impressive performance, advanced technology, and high-quality materials, making it a popular choice for upgrading factory-installed audio systems.

One of the main features of the MTX Audio 622CM is its robust design. The speakers are equipped with a polypropylene cone that delivers exceptional sound clarity and minimizes distortion. The rubber surround enhances durability while providing better bass response, ensuring that the listeners enjoy a rich and immersive audio experience. The system also includes a powerful 1-inch soft dome tweeter that produces crisp highs, rounding out the overall sound spectrum.

In terms of technologies, the 622CM features a specially designed crossover network that optimizes the distribution of frequencies between the woofer and tweeter. This ensures that each speaker plays its designated range with precision and reduces the chance of frequency overlap, which can muddle the sound. The crossover also allows for easy integration into a variety of car audio systems, providing flexibility for users who want to enhance their sound without extensive modifications.

Another characteristic that sets the MTX Audio 622CM apart is its power handling capability. With a peak power handling of 300 watts and a continuous power handling of 100 watts RMS, these speakers can handle a wide range of audio signals, from low bass notes to high treble sounds. This versatility makes them suitable for both casual listeners and serious audiophiles who crave superior sound quality.

The installation of the 622CM is designed to be straightforward, featuring versatile mounting options that can accommodate a variety of vehicle types and configurations. The kit generally includes all necessary hardware and detailed instructions, making it accessible for DIY enthusiasts.

Overall, the MTX Audio 622CM exemplifies a commitment to sound quality and design excellence. With its advanced materials, robust engineering, and smart technology, it stands out as a premium choice for anyone looking to elevate their car audio system. Whether you’re driving down the highway or parked at a tailgate, the 622CM promises a sound experience that will leave an impression.