Heatiator NB3630MI Electrical Information, Recommendation for Wire, Connecting to the Appliance

Page 21

10 Electrical Information

A. Recommendation for Wire

This appliance requires 110-120 VAC to be wired to the junc- tion box either for use of optional accessories (standing pilot ignition) or for proper operation of the appliance (Intellifire ignition).

Open the control access panel to view wiring system and gas valve. If this appliance has a red or black ignitor button this appliance has a standing pilot ignition system. If there is no red or black ignitor button, this appliance has an Intellifire ignition system.

Note: This appliance must be electrically wired and grounded in accordance with local codes or, in the absence of local codes, with National Electric Code ANSI/NFPA 70-latest edition or the Canadian Electric Code CSA

C22.1.

B. Connecting to the Appliance

WARNING

Shock Risk

Explosion Risk

Do NOT wire 110V to valve.

Do NOT wire 110V to wall switch

•Incorrect wiring will damage millivolt values.

•Incorrect wiring will override IPI safety lockout and may cause explosion.

•This appliance may be used with a wall switch, wall mounted thermostat and/or a remote control.

•If using thermostat use one compatible with a millivolt gas valve system.

•Follow parameters for locating thermostat (see individual thermostat instructions) to ensure proper operation of appliance.

•Use low resistance thermostat wire for wiring from ignition system to the wall switch and thermostat.

•Keep wire lengths short as possible by removing any excess wire length.

•Low voltage and 110 VAC voltage cannot be shared within the same wall box.

C. Intellifire Ignition System Wiring

This appliance requires a 110 VAC supply to the appliance junction box for operation. (See Figure 10.1 for a wiring dia- gram and Figure 10.3 for junction box wiring.)

This appliance is equipped with an Intellifire control valve which operates on a 3 volt system.

This appliance is supplied with a battery pack and a 3 volt AC transformer, which requires the installation of the sup- plied junction box. It is highly recommended that the junction box be installed at this time to avoid reconstruction.

The battery pack requires two D cell batteries (not included). Batteries cannot be placed in the battery pack while using the 3 volt AC transformer. Conversely, the transformer must be unplugged if the battery pack is used.

CAUTION

Battery polarity must be correct or module damage will occur.

Optional Accessories Requirements

Wiring for optional accessories should be done now to avoid reconstruction.

CAUTION

Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

CAUTION

Shock Risk

•Replace damaged wire with type 105° C rated wire.

•Wire must have high temperature insulation.

Heatilator • Novus BV-Mesh • 4031-553 Rev F • 11/07

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Hot glass will cause burns What to do if you smell gasListing Label Information/Location CongratulationsTable of Contents Listing and Code Approvals Getting Started Design and Installation ConsiderationsNegative Pressure Negative PressureAsphyxiation Risk Tools and Supplies Needed Inspect the Appliance and ComponentsAny such action may cause a fire hazard Framing and Clearances Select Appliance LocationFire Risk Construct the Appliance Chase Fire Risk Odor Risk ClearancesClearances to Mantels or Other Combustibles Above Appliance Mantel ProjectionsVent Termination Minimum Clearances Termination LocationsFire Risk Explosion Risk Termination Caps Staggered HeightVent Guidelines Vent System Configuration Vent Information and DiagramsModel Pipe Size Fire Risk Explosion Risk Asphyxiation RiskElbow Distance is 50% of vertical Vent height Pipe Clearances to Combustibles Vent Clearances and FramingWall Penetration Framing Vertical Penetration FramingAppliance Preparation Installing Outside Air Kit Damper AssemblyRisk of Smoke Spillage Fire Risk Asphyxiation RiskSecuring and Leveling Appliance Gas and Electrical ConnectionsAttach Vent to Firebox Assembly Installing Vent PipeAssemble Vent Sections Securing Vent SectionsFuel Conversion Gas Connection Gas InformationGas Pressure Pressure Natural Gas PropaneCheck for GAS Leaks Connecting to the Appliance Recommendation for WireIntellifire Ignition System Wiring Optional Accessories RequirementsGAS Standing Pilot Ignition System WiringWall Switch Installation for Fan Op- tional Junction Box InstallationFacing Material FinishingAppliance Setup Install Clean Face Components Replace Glass AssemblyInstall Hood Install Top Latch CoverInstall Floor Cover Install Bottom Latch CoverInstall Firescreen Assembly 10 Air Shutter Air Shutter SettingBefore Lighting Appliance Operating InstructionsBefore operating this appliance, have a qualified technician Fire Risk Combustion Fumes RiskChecking Appliance Draft Check Appliance DraftIntellifire Ignition Lighting the ApplianceIgnition For Your Safety Read Before LightingInitial Break-in Procedure Frequently Asked QuestionsFire Risk High Temperatures Issue SolutionsTroubleshooting Symptom Possible Causes Corrective ActionsStanding Pilot Ignition System Placed in this Opening Intellifire Ignition System Symptom Possible Causes Corrective Actions Maintaining and Servicing the Appliance Inspect Maintenance Tasks Maintenance and Service TasksReference Materials Appliance Dimension DiagramThis page intentionally left blank ¨ B. Service Parts List Log/Grate AssemblyLog/Grate Assembly Description of Part NB3630M NB3630MI QtyWool, Rock, Vermiculite #13 SP Valve Assembly NB3630M Series NB3933M Series Description of Part NB3933M NB3933MI Qty #13 IPI Valve Assembly NB3933M Series NB4236M Series Description of Part NB4236M NB4236MI Qty #13 SP Valve Assembly #13 IPI Valve Assembly NB4236M Series NB4842M Series Description of Part NB4842M NB4842MI Qty #13 IPI Valve Assembly NB4842M Series Model # Description Optional ComponentsGFK4B TKN62B TKN22B Fixed, Cabinet-Style TB33 Traditional Brick Refractory This page intentionally left blank This page intentionally left blank This page intentionally left blank Limited Lifetime Warranty Limited Lifetime WarrantyYear Limited Warranty How to Obtain ServiceDo Discardnot

NB3933M, NB3630M, NB3630MI, NB3933MI, NB4236M specifications

The Heatiator series of gas fireplaces, including the models NB4236MI, NB4842MI, NB3933M, NB4236M, and NB3933MI, epitomizes modern heating technology with a focus on efficiency, design, and user comfort. These models are engineered to provide warmth while enhancing the aesthetic appeal of any living space.

One of the standout features of the Heatiator series is its advanced combustion technology. The fireplaces are designed to maximize heat output while minimizing emissions. This is achieved through high-quality burners that ensure a clean and efficient flame, allowing users to enjoy the ambient glow without compromise. The models boast impressive thermal efficiencies, meaning they convert a high percentage of the fuel consumed into usable heat, which is an essential factor for eco-conscious consumers.

Design flexibility is another key characteristic of the Heatiator fireplaces. The models in this series come in various sizes and styles, offering options that can blend seamlessly into any decor. Whether you prefer a traditional look or a more contemporary aesthetic, there’s a model to suit your taste. The large viewing areas provided by the glass front panels offer an unobstructed view of the flame, adding a cozy ambiance to your home.

The Heatiator NB4236MI and NB4842MI models feature innovative multi-function remote controls, giving users the convenience of adjusting settings from anywhere in the room. This built-in technology not only enhances user experience but also contributes to energy savings by allowing precise control over the fireplace's operation.

Safety is also a priority with the Heatiator lineup. Equipped with features such as an automatic shut-off system and tempered glass fronts, users can enjoy peace of mind knowing that safety is paramount.

In terms of customization, these models offer various finishes and log options, allowing homeowners to personalize their fireplaces to match their style and preferences.

Overall, the Heatiator NB4236MI, NB4842MI, NB3933M, NB4236M, and NB3933MI represent a perfect blend of technology, safety, and design sophistication, making them an excellent choice for anyone looking to add a reliable and attractive heating solution to their home. Whether for supplemental heat or a primary heating source, these fireplaces are built to deliver exceptional performance in any setting.
Top Page Image Contents