Heatiator NB3933M, NB4842M Tools and Supplies Needed, Inspect the Appliance and Components

Page 7

C. Tools and Supplies Needed

Before beginning the installation be sure that the following tools and building supplies are available.

Reciprocating saw

Framing material

Pliers

Hi temp caulking material

Hammer

Gloves

Phillips screwdriver

Framing square

Flat blade screwdriver

Electric drill and bits (1/4 in.)

Plumb line

Safety glasses

Level

Manometer

Voltmeter

Tape measure

Non-corrosive leak check solution

1/2 - 3/4 in. length, #6 or #8 Self-drilling screws One 1/4 in. female connection (for optional fan).

D. Inspect the Appliance and Components

WARNING

Inspect appliance and components for damage. Damaged parts may impair safe operation.

•Do NOT install damaged components.

•Do NOT install incomplete components.

•Do NOT install substitute components.

Report damaged parts to dealer.

The following B-vent components are needed for installa- tion. See Figure 2.2.

•Appliance

•Pipe components

•Firestops

•Attic Insulation Shield

•Elbows

•Strapping

•Roof flashing or chase top

•Termination cap

•Storm Collar

•Carefully remove the appliance and components from the packaging.

•The vent system components and trim doors are shipped in separate packages.

•The gas logs may be packaged separately and must be field installed.

•Report to your dealer any parts damaged in shipment, particularly the condition of the glass.

•Read all of the instructions before starting the installation. Follow these instructions carefully during the installation to ensure maximum safety and benefit.

Vertical

Termination

Cap

Storm

Collar

Roof

Flashing

Ceiling

Firestop

B-Vent Pipe

Sections

Figure 2.2 Typical Vertical Installation

WARNING

Hearth & Home Technologies disclaims any responsibility for, and the warranty will be voided by, the following actions:

•Installation and use of any damaged appliance or vent system component.

•Modification of the appliance or vent system.

•Installation other than as instructed by Hearth & Home Technologies.

•Improper positioning of the gas logs or the glass door.

•Installation and/or use of any component part not approved by Hearth & Home Technologies.

Any such action may cause a fire hazard.

Heatilator • Novus BV-Mesh • 4031-553 Rev F • 11/07

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Hot glass will cause burns What to do if you smell gasListing Label Information/Location CongratulationsTable of Contents Listing and Code Approvals Getting Started Design and Installation ConsiderationsNegative Pressure Negative PressureAsphyxiation Risk Inspect the Appliance and Components Tools and Supplies NeededAny such action may cause a fire hazard Select Appliance Location Framing and ClearancesFire Risk Construct the Appliance Chase Fire Risk Odor Risk ClearancesClearances to Mantels or Other Combustibles Above Appliance Mantel ProjectionsTermination Caps Staggered Height Termination LocationsVent Termination Minimum Clearances Fire Risk Explosion RiskFire Risk Explosion Risk Asphyxiation Risk Vent Information and DiagramsVent Guidelines Vent System Configuration Model Pipe SizeElbow Distance is 50% of vertical Vent height Vertical Penetration Framing Vent Clearances and FramingPipe Clearances to Combustibles Wall Penetration FramingFire Risk Asphyxiation Risk Installing Outside Air Kit Damper AssemblyAppliance Preparation Risk of Smoke SpillageSecuring and Leveling Appliance Gas and Electrical ConnectionsSecuring Vent Sections Installing Vent PipeAttach Vent to Firebox Assembly Assemble Vent SectionsPressure Natural Gas Propane Gas InformationFuel Conversion Gas Connection Gas PressureCheck for GAS Leaks Optional Accessories Requirements Recommendation for WireConnecting to the Appliance Intellifire Ignition System WiringGAS Standing Pilot Ignition System WiringWall Switch Installation for Fan Op- tional Junction Box InstallationFacing Material FinishingAppliance Setup Install Top Latch Cover Replace Glass AssemblyInstall Clean Face Components Install HoodInstall Bottom Latch Cover Install Floor CoverInstall Firescreen Assembly 10 Air Shutter Air Shutter SettingFire Risk Combustion Fumes Risk Operating InstructionsBefore Lighting Appliance Before operating this appliance, have a qualified technicianChecking Appliance Draft Check Appliance DraftIntellifire Ignition Lighting the ApplianceIgnition For Your Safety Read Before LightingIssue Solutions Frequently Asked QuestionsInitial Break-in Procedure Fire Risk High TemperaturesSymptom Possible Causes Corrective Actions TroubleshootingStanding Pilot Ignition System Placed in this Opening Intellifire Ignition System Symptom Possible Causes Corrective Actions Maintaining and Servicing the Appliance Inspect Maintenance Tasks Maintenance and Service TasksReference Materials Appliance Dimension DiagramThis page intentionally left blank ¨ B. Service Parts List Log/Grate AssemblyDescription of Part NB3630M NB3630MI Qty Log/Grate AssemblyWool, Rock, Vermiculite #13 SP Valve Assembly NB3630M Series NB3933M Series Description of Part NB3933M NB3933MI Qty #13 IPI Valve Assembly NB3933M Series NB4236M Series Description of Part NB4236M NB4236MI Qty #13 SP Valve Assembly #13 IPI Valve Assembly NB4236M Series NB4842M Series Description of Part NB4842M NB4842MI Qty #13 IPI Valve Assembly NB4842M Series Model # Description Optional ComponentsGFK4B TKN62B TKN22B Fixed, Cabinet-Style TB33 Traditional Brick Refractory This page intentionally left blank This page intentionally left blank This page intentionally left blank How to Obtain Service Limited Lifetime WarrantyLimited Lifetime Warranty Year Limited WarrantyDo Discardnot

NB3933M, NB3630M, NB3630MI, NB3933MI, NB4236M specifications

The Heatiator series of gas fireplaces, including the models NB4236MI, NB4842MI, NB3933M, NB4236M, and NB3933MI, epitomizes modern heating technology with a focus on efficiency, design, and user comfort. These models are engineered to provide warmth while enhancing the aesthetic appeal of any living space.

One of the standout features of the Heatiator series is its advanced combustion technology. The fireplaces are designed to maximize heat output while minimizing emissions. This is achieved through high-quality burners that ensure a clean and efficient flame, allowing users to enjoy the ambient glow without compromise. The models boast impressive thermal efficiencies, meaning they convert a high percentage of the fuel consumed into usable heat, which is an essential factor for eco-conscious consumers.

Design flexibility is another key characteristic of the Heatiator fireplaces. The models in this series come in various sizes and styles, offering options that can blend seamlessly into any decor. Whether you prefer a traditional look or a more contemporary aesthetic, there’s a model to suit your taste. The large viewing areas provided by the glass front panels offer an unobstructed view of the flame, adding a cozy ambiance to your home.

The Heatiator NB4236MI and NB4842MI models feature innovative multi-function remote controls, giving users the convenience of adjusting settings from anywhere in the room. This built-in technology not only enhances user experience but also contributes to energy savings by allowing precise control over the fireplace's operation.

Safety is also a priority with the Heatiator lineup. Equipped with features such as an automatic shut-off system and tempered glass fronts, users can enjoy peace of mind knowing that safety is paramount.

In terms of customization, these models offer various finishes and log options, allowing homeowners to personalize their fireplaces to match their style and preferences.

Overall, the Heatiator NB4236MI, NB4842MI, NB3933M, NB4236M, and NB3933MI represent a perfect blend of technology, safety, and design sophistication, making them an excellent choice for anyone looking to add a reliable and attractive heating solution to their home. Whether for supplemental heat or a primary heating source, these fireplaces are built to deliver exceptional performance in any setting.
Top Page Image Contents