Heatiator NB3630MI, NB4236MI, NB4842MI Operating Instructions, Before Lighting Appliance

Page 29

13 Operating Instructions

A. Before Lighting Appliance

Before lighting this appliance, determine if it has a stand- ing pilot or Intellifire ignition system by opening the control access panel to view wiring system and gas valve. If this appliance has a red or black ignitor button (See Figure 10.1) this appliance has a standing pilot ignition system. If there is no red or black ignitor button, this appliance has an Intellifire ignition system.

WARNING

Do NOT use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

CAUTION

If installing Intellifire Ignition battery backup:

•Do not install batteries if the backup mode may not be used for extended time.

•Batteries may leak.

•Install batteries only when needed for power outage.

Before operating this appliance, have a qualified technician:

•Remove all shipping materials from inside and/or underneath the firebox.

•Review proper placement of logs, rockwool, lava rock and vermiculite.

•Check the wiring.

•Check the air shutter adjustment.

•Ensure that there are no gas leaks.

•Ensure that the glass is sealed and in the proper position.

•Ensure that the flow of combustion and ventilation air is not obstructed (front grilles and vent caps).

WARNING

Fire Risk

Combustion Fumes Risk

Glass door MUST be in place when appliance is operating.

Do NOT operate appliance with glass door removed.

•Open viewing glass for servicing only.

•Glass door MUST be in place and sealed before operating appliance.

•Only use glass doors certified for use with the appliance.

•Glass replacement should be done by qualified technician.

WARNING

¨

 

HOT SURFACES!

Glass and other surfaces are hot during operation and cool down.

Hot glass will cause burns.

• Do not touch glass until it is cooled

•NEVER allow children to touch glass

•Keep children away

•CAREFULLY SUPERVISE children in same room as appliance.

•Alert children and adults to hazards of high temperatures.

High temperatures may ignite clothing or other flammable materials.

•Keep clothing, furniture, draperies and other combustibles away.

This appliance has been supplied with an integral barrier to prevent direct contact with the fixed glass panel. Do NOT operate the appliance with the barrier removed.

Contact your dealer or Hearth & Home Technologies if the barrier is not present or help is needed to properly install one.

WARNING

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to the owner’s information manual provided with this appliance. For assistance or additional information consult a qualified installer, service agency or the gas supplier.

Heatilator • Novus BV-Mesh • 4031-553 Rev F • 11/07

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Hot glass will cause burns What to do if you smell gasListing Label Information/Location CongratulationsTable of Contents Listing and Code Approvals Getting Started Design and Installation ConsiderationsAsphyxiation Risk Negative PressureNegative Pressure Any such action may cause a fire hazard Tools and Supplies NeededInspect the Appliance and Components Fire Risk Framing and ClearancesSelect Appliance Location Construct the Appliance Chase Fire Risk Odor Risk ClearancesClearances to Mantels or Other Combustibles Above Appliance Mantel ProjectionsVent Termination Minimum Clearances Termination LocationsFire Risk Explosion Risk Termination Caps Staggered HeightVent Guidelines Vent System Configuration Vent Information and DiagramsModel Pipe Size Fire Risk Explosion Risk Asphyxiation RiskElbow Distance is 50% of vertical Vent height Pipe Clearances to Combustibles Vent Clearances and FramingWall Penetration Framing Vertical Penetration FramingAppliance Preparation Installing Outside Air Kit Damper AssemblyRisk of Smoke Spillage Fire Risk Asphyxiation RiskSecuring and Leveling Appliance Gas and Electrical ConnectionsAttach Vent to Firebox Assembly Installing Vent PipeAssemble Vent Sections Securing Vent SectionsFuel Conversion Gas Connection Gas InformationGas Pressure Pressure Natural Gas PropaneCheck for GAS Leaks Connecting to the Appliance Recommendation for WireIntellifire Ignition System Wiring Optional Accessories RequirementsGAS Standing Pilot Ignition System WiringWall Switch Installation for Fan Op- tional Junction Box InstallationFacing Material FinishingAppliance Setup Install Clean Face Components Replace Glass AssemblyInstall Hood Install Top Latch CoverInstall Firescreen Assembly Install Floor CoverInstall Bottom Latch Cover 10 Air Shutter Air Shutter SettingBefore Lighting Appliance Operating InstructionsBefore operating this appliance, have a qualified technician Fire Risk Combustion Fumes RiskChecking Appliance Draft Check Appliance DraftIntellifire Ignition Lighting the ApplianceIgnition For Your Safety Read Before LightingInitial Break-in Procedure Frequently Asked QuestionsFire Risk High Temperatures Issue SolutionsStanding Pilot Ignition System TroubleshootingSymptom Possible Causes Corrective Actions Placed in this Opening Intellifire Ignition System Symptom Possible Causes Corrective Actions Maintaining and Servicing the Appliance Inspect Maintenance Tasks Maintenance and Service TasksReference Materials Appliance Dimension DiagramThis page intentionally left blank ¨ B. Service Parts List Log/Grate AssemblyWool, Rock, Vermiculite Log/Grate AssemblyDescription of Part NB3630M NB3630MI Qty #13 SP Valve Assembly NB3630M Series NB3933M Series Description of Part NB3933M NB3933MI Qty #13 IPI Valve Assembly NB3933M Series NB4236M Series Description of Part NB4236M NB4236MI Qty #13 SP Valve Assembly #13 IPI Valve Assembly NB4236M Series NB4842M Series Description of Part NB4842M NB4842MI Qty #13 IPI Valve Assembly NB4842M Series Model # Description Optional ComponentsGFK4B TKN62B TKN22B Fixed, Cabinet-Style TB33 Traditional Brick Refractory This page intentionally left blank This page intentionally left blank This page intentionally left blank Limited Lifetime Warranty Limited Lifetime WarrantyYear Limited Warranty How to Obtain ServiceDo Discardnot

NB3933M, NB3630M, NB3630MI, NB3933MI, NB4236M specifications

The Heatiator series of gas fireplaces, including the models NB4236MI, NB4842MI, NB3933M, NB4236M, and NB3933MI, epitomizes modern heating technology with a focus on efficiency, design, and user comfort. These models are engineered to provide warmth while enhancing the aesthetic appeal of any living space.

One of the standout features of the Heatiator series is its advanced combustion technology. The fireplaces are designed to maximize heat output while minimizing emissions. This is achieved through high-quality burners that ensure a clean and efficient flame, allowing users to enjoy the ambient glow without compromise. The models boast impressive thermal efficiencies, meaning they convert a high percentage of the fuel consumed into usable heat, which is an essential factor for eco-conscious consumers.

Design flexibility is another key characteristic of the Heatiator fireplaces. The models in this series come in various sizes and styles, offering options that can blend seamlessly into any decor. Whether you prefer a traditional look or a more contemporary aesthetic, there’s a model to suit your taste. The large viewing areas provided by the glass front panels offer an unobstructed view of the flame, adding a cozy ambiance to your home.

The Heatiator NB4236MI and NB4842MI models feature innovative multi-function remote controls, giving users the convenience of adjusting settings from anywhere in the room. This built-in technology not only enhances user experience but also contributes to energy savings by allowing precise control over the fireplace's operation.

Safety is also a priority with the Heatiator lineup. Equipped with features such as an automatic shut-off system and tempered glass fronts, users can enjoy peace of mind knowing that safety is paramount.

In terms of customization, these models offer various finishes and log options, allowing homeowners to personalize their fireplaces to match their style and preferences.

Overall, the Heatiator NB4236MI, NB4842MI, NB3933M, NB4236M, and NB3933MI represent a perfect blend of technology, safety, and design sophistication, making them an excellent choice for anyone looking to add a reliable and attractive heating solution to their home. Whether for supplemental heat or a primary heating source, these fireplaces are built to deliver exceptional performance in any setting.
Top Page Image Contents