Weil-McLain UO-4 CV, UO-5 CV, UO-3 CV manual Warranty

Page 25

Limited

WARRANTY

For Residential, Commercial and Specialty Burners

The R. W. BECKETT CORPORATION (“Beckett”) warrants to persons who purchase its Beckett burners from Beckett for resale or for incorporation into a product for resale (“Customers”) that its equipment is free from defects in material and workmanship under normal use and service for 60 months from the date of manufacture for Residential Burners and 18 months from the date of manufacture for Commercial and Specialty Burners. Residential burner models include: AF, AFG, AFII, NX, SF, SR and SMG. Commercial burner models include: CF375, CF500, CF800, CF1400, CF2300A, CF2500, CF3500A, CG10, CG15, CG25 and CG50. Specialty burner models include: ADC, ADCP, ARV, SDC and SM. The provisions of this warranty are extended to individual major burner components as follows:

a) 60 months from date of manufacture for all Beckett-branded major components, except for 12 Vdc components.

b) 18 months from date of manufacture for all non-Beckett-branded major components and Beckett branded 12 Vdc components.

Note: Normal service items found to be defective upon receipt by the customer are covered by this warranty.

THIS WARRANTY DOES NOT EXTEND TO EQUIPMENT SUBJECTED TO MISUSE, NEGLECT, OR ACCIDENT: NOR DOES THIS WARRANTY APPLY UNLESS THE PRODUCT COVERED BY IT IS PROPERLY INSTALLED BY A QUALIFIED, COMPETENT TECHNICIAN, WHO IS LICENSED WHERE STATE AND LOCAL CODES REQUIRE, AND WHO IS EXPERIENCED IN MAKING SUCH INSTALLATIONS, IN ACCORDANCE WITH THE LATEST EDITION OF NFPA NO. 31 OF THE NATIONAL FIRE PROTECTION ASSOCIATION, THE LATEST EDITION OF THE NATIONAL FUEL GAS CODE (NFPA NO. 54) AND IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE AND NATIONAL CODES HAVING JURISDICTIONAL AUTHORITY.

Equipment, which is defective in material or workmanship and within the warranty period, may be returned for credit as follows:

Beckett Burners, Beckett-branded major components and non-Beckett-branded major components that came as original equipment on a Beckett burner or were sold as a replacement part by Beckett should be returned, freight prepaid, to Beckett’s home office. Credit will be issued to the customer unless the returned equipment is determined by Beckett to be out of warranty or damaged by user, in which case the equipment will be scrapped.

Note: Beckett is not responsible for any labor cost for removal and replacement of equipment.

THIS WARRANTY IS LIMITED TO THE PRECISE TERMS SET FORTH ABOVE, AND PROVIDES EXCLUSIVE REMEDIES EXPRESSLY IN LIEU OF ALL OTHER REMEDIES, AND IN PARTICULAR THERE SHALL BE EXCLUDED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. IN NO EVENT WILL BECKETT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE OF ANY NATURE. Beckett neither assumes nor authorizes any person to assume for Beckett any other liability or obligation in connection with the sale of this equipment, Beckett’s liability and Customer’s exclusive remedy being limited to credit as set forth above.

R.W. BECKETT CORPORATION

P.O. Box 1289 Elyria, Ohio 44036

Form No. 61545 R72905

 

 

 

 

The Oilheat Manufacturers’ Association supports the use of low sulfur fuels as defined by ASTM D396, Grades No. 1 Low Sulfur and No. 2 Low Sulfur, as the preferred heating fuel for the following reasons:

•Low sulfur fuels reduce deposits on heat exchanger surfaces, extending the service interval between cleanings.

•The reduced deposits increase the efficiency of the appliance.

•Low sulfur fuels reduce particulate emissions.

•Low sulfur fuels reduce oxides of nitrogen emissions.

R.W. BECKETT CORPORATION

U.S.A.: P.O. Box 1289 · Elyria, Ohio 44036

www.beckettcorp.com

Canada: R.W. Beckett Canada, Ltd. · Unit #3, 430 Laird Road · Guelph, Ontario N1G 3X7

Form Number 6104 BAFG R06

Printed in U.S.A.

© 2008 R.W. Beckett Corporation

01/14/09

 

Page 24

6104BAFG R06

Page 24 Page 25
Image 25
Page 24 Page 25
Contents R02 01/09 Potential for Fire, Smoke and Asphyxiation Hazards To the Professional, Qualif ed Installer or Service AgencyTo the Homeowner or Equipment Owner Information To Be Used Only By Qualif ed Service Technicians Table of ContentsHazard Definitions FeatureGeneral Information Indicates a hazardous situBurner Specif cations General Information To the OwnerWeekly Air Tube Combination ATC codes General SpecificationsInspect Chimney or Direct Vent System Tion Hazard Inspect/Prepare Installation SiteClearances to burner and appliance Chamber DimensionsCombustion chamber Burner retrof t- ting NozzleInspect/Prepare Installation Site Prepare the Burner Mount burner on appliance Prepare the BurnerBurner Dimensions Check/Adjust ‘Z’ Dimension ‘F’ headsCheck/Adjust ‘Z’ Dimension L1 & L2 Heads Fuel Line Valves and Filter Installing the Oil Tank and Supply SystemBurner installed at jobsite Wire burnerSpecial wiring required with covered burners Frozen Plumbing Water Damage HazardFeatures WiringBurner Controls GeniSys Model 7505 Control Fire or Explosion HazardBurner Controls Light Color On Continuously Flashing Reset Button OperationControl System Features Typical Burner WiringResetting From Restricted or Hard Lockout Cad Cell Resistance IndicatorStart up burner/set combustion Hot Gas Puff-Back Heavy Smoke HazardStartup / Checkout Check Safety FeaturesStartup/Checkout Set combustion with instrumentsShutting the Burner Off Perform regular maintenanceReplace the blower wheel Blower wheel assemblyPage Description Warranty

UO-3 CV, UO-4 CV, UO-5 CV specifications

Weil-McLain is a well-respected name in the heating industry, recognized for its high-quality and efficient boiler systems. Among its notable offerings are the UO-3 CV, UO-4 CV, and UO-5 CV models, all of which showcase advanced engineering and innovative technology tailored for residential and commercial applications.

The UO-3 CV boiler is designed for mid-sized heating requirements, boasting a strong output capacity that balances efficiency with performance. It features a compact size, suitable for smaller installations, without sacrificing power. The boiler is equipped with a durable cast iron heat exchanger that provides excellent thermal efficiency and longevity, ensuring reliable operation over the years. Its easy access for maintenance also makes it a popular choice among HVAC professionals.

Moving to the UO-4 CV model, this boiler builds on the success of the UO-3 with an increased output capacity, making it ideal for larger residential or light commercial spaces. The UO-4 CV incorporates Weil-McLain’s advanced combustion technology, which optimizes fuel use and significantly reduces emissions. This model maintains a compact design while enhancing overall performance through improved heat transfer and reduced standby losses. The UO-4 CV's user-friendly features, including easy-to-use controls and a diagnostic system, streamline operational efficiency.

The UO-5 CV further solidifies Weil-McLain's commitment to excellence with its highest output among the three. This boiler is particularly suited for extensive heating demands, making it popular among larger commercial installations. The UO-5 CV also employs cutting-edge technology, including advanced controls for precise temperature regulation and an efficient system designed to minimize energy consumption. Its robust construction ensures it can handle heavy use while remaining reliable, even in challenging environments.

In summary, the Weil-McLain UO series, including the UO-3 CV, UO-4 CV, and UO-5 CV, represents a perfect blend of efficiency, innovation, and reliability. All models utilize durable materials, advanced engineering, and state-of-the-art technologies that define Weil-McLain's reputation for quality in hydronic heating solutions. Whether for residential or commercial applications, these boilers serve as dependable sources of heat, catering to various needs while maintaining energy efficiency and lower emissions.
Top Page Image Contents