Heath Zenith installation instructions Model SL-5653, Desa Specialty Products 598-1062-02

Page 1

Model SL-5653

175 Watt Mercury Vapor Dusk to Dawn Security Light

Installation Instructions With Two Piece Arm

READ ALL INSTRUCTIONS CAREFULLY BEFORE BEGINNING INSTALLATION.

NOTE: All wiring must be run in accordance with the National Electrical Code (Canadian Electrical Code in Canada) through conduit or another acceptable means. Contact a qualified electrician if there is any question as to the suitability of the system.

CAUTION: Make sure the power is off before starting the installation.

1.Select a location on a flat wall with structurally sound wood and from 10 to 25 feet from the ground. The wood should be at least one inch thick to safely secure the fixture.

2.Slide the curved section of the mounting arm into the mounting bracket. Tighten the bolts on the mounting bracket evenly.

3.Using the mounting arm and bracket as a guide mark four mounting holes. We suggest drilling 3/16" pilot holes for the lag screws.

4.Mount the arm and bracket using four lag screws and washers provided.

5.Place a ring of silicone caulk around mounting arm (see illustration). Slide the straight section of the mounting arm on to the curved section aligning the predrilled holes.

6.Secure the two sections with two bolts, nuts and four washers provided. Place silicone caulk on top of the bolts and washers to prevent water from entering.

7.Thread your outdoor cable or flexible conduit through the mounting arm.

8.Loosely connect the mounting strap to the fixture using two bolts provided.

9.Slide the fixture on to the mounting arm until the fixture comes to a stop. Secure the fixture to the mounting arm by tightening the two mounting strap bolts.

10.Connect the fixture wires to the service wires using the wire nuts provided (black to black and white to white). Push the connections as far as possible into the straight arm.

11.This fixture must be grounded. Connect the service ground under the head of the green ground screw and secure to the mounting strap.

12.Install the lens/reflector assembly with two screws and washers provided.

13.Install ONLY a 175 watt mercury vapor type H39 lamp (provided).

14.Loosen the screw in the center of the photocontrol socket two turns. Twist the socket so that the arrow points north. Note: There is a stop to prevent the socket from turning all the way around. If you have trouble turning the socket, try turning it the other direction. Retighten the screw in the center of the socket.

15.Align the photocontrol (it will only plug-in one way). Plug it in and twist clockwise until it stops.

To test operation during daylight, cover the photocontrol with a small box. Turn on the power. Not all photocontrols are alike. Some may have a time delay of a few minutes, others will turn on as soon as power is applied. The light will take up to ten minutes to reach full brightness. Uncover the photocontrol and your unit will operate automatically—on at dusk, off at dawn.

Photocontrol

Mounting

Arm

Silicone

Caulk

Mounting Strap

Ground

Screw

Lens/Reflector

Assembly

Lag

Screw

(4)

Mounting

Bracket

Flat Washer (10)

© 2003 DESA Specialty Products™

598-1062-02

Image 1
Contents Model SL-5653 Installation Instructions With Two Piece ArmDesa Specialty Products 598-1062-02 ONE Year Limited Warranty Installation Instructions Without Two Piece ArmInstrucciones para instalación con brazo de dos piezas Modelo SL-5653Instrucciones para instalación sin brazo de dos piezas Garantía Limitada a 1 AÑO Modèle SL-5653 Mode d’installation du modèle avec bras en deux pièces’allumera au crépuscule et s’éteindra à l’aurore Desa Specialty ProductsMode d’installation du modèle sans bras Garantie Limitée DE 1 AN

SL-5653 specifications

The Heath Zenith SL-5653 is a versatile and robust outdoor motion sensor light designed to enhance security and provide convenience around homes and businesses. Featuring a sleek design, this motion-activated light combines functionality with aesthetic appeal, making it an ideal addition to various exterior settings.

One of the standout features of the SL-5653 is its advanced motion sensor technology. The integrated PIR (Passive Infrared) sensor detects movement within a specified range, triggering the light to illuminate when someone approaches. This is particularly useful for homeowners wanting to deter potential intruders or simply illuminate pathways for safety. The adjustable sensitivity settings allow users to customize the detection range, ensuring that the light activates under the desired conditions.

The SL-5653 boasts a durable construction designed to withstand the elements. The weather-resistant materials ensure that it functions effectively, regardless of rain, snow, or extreme temperatures. This durability makes it an excellent choice for outdoor applications in varied climates.

Another impressive characteristic of the SL-5653 is its energy efficiency. The light is equipped with LED technology, which not only consumes less power but also has a longer lifespan compared to traditional bulbs. This means lower electricity bills and reduced frequency in bulb replacements, ultimately leading to more sustainable energy consumption. The efficient LED light provides ample illumination while contributing to environmental conservation efforts.

The SL-5653 also features a series of customizable settings. Users can select different modes, including manual operation and timed duration settings, allowing the light to remain on for a predetermined period after activation. This is particularly useful for planned outdoor gatherings or when extra lighting is needed without the motion sensor's automatic step.

Easy installation is another highlight of the Heath Zenith SL-5653. The light comes with straightforward instructions and mounting hardware, enabling quick setup even for those with minimal DIY experience. With its attractive sleek design and versatile functionality, the SL-5653 is a practical choice for enhancing safety, security, and convenience in outdoor environments. In summary, the Heath Zenith SL-5653 is a feature-rich, reliable, and efficient solution for anyone looking to improve their outdoor lighting and security measures.