Heath Zenith SL-4100 warranty Installation, Mode Switching Summary, DualBrite Dimmer Control

Page 2

Mode Switching Summary

 

TEST

 

 

ON-TIME Switch at 1,

 

 

 

 

 

 

 

 

 

 

 

5, or 20 minutes

 

 

 

 

 

 

 

 

AUTO

 

 

 

 

 

Flip light

 

 

 

 

 

 

 

 

 

 

 

 

 

 

switch off for

 

 

 

 

 

 

 

one second

MANUAL MODE

 

 

 

 

 

 

then back on*

 

 

 

 

 

 

 

*If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the AUTO mode.

DualBrite® Dimmer Control

Light comes on half bright for selected time af- ter dusk (Off, 3 hr., 6 hr., until dawn).Selecting OFF disables this feature.The motion sensing features will continue to work as described in this manual. If motion is sensed, the light turns on full bright for the ON-TIME (1, 5, or 20 minutes) then returns to dim mode.

INSTALLATION

WARNING: Turn power off at circuit breaker or fuse.

1.On existing installations, remove the light from the top of the post. Keep the wire connectors to make the connections to the top of the sensor.

CAUTION: When handling the sensor be careful not to pinch or distort the lens.You may break the seal and cause windblown rain to enter the sensor.

2.Remove the three screws around the bottom edge of the sensor. Save these screws for later use.

3.Set the controls on the bottom as shown: ON-TIME to TEST, DualBrite® (ACCENT) OFF, and Sensitivity to mid-position.

ON TIME

ACCENT

MINUTES

 

 

 

 

 

 

20

 

 

 

 

DUSK TO DAWN

 

 

 

 

5

 

 

 

 

 

6 HOUR

 

 

 

 

1

 

 

 

 

 

3 HOUR

 

 

 

 

TEST

 

 

 

 

 

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX

SENSITIVITY

MIN

4.Twist the wires from the post and the bottom sensor wires together as shown. Secure with wire connectors provided.

5.Make sure the wires and connectors are all inside the post, then set the sensor onto the post.

6.Start and temporarily tighten the three screws previously removed from the sen- sor.

7.Twist the wires from the fixture and the top sensor wires together as shown. Secure with wire connectors saved from your fixture.

8.Make sure all the wires and connectors are inside the fixture/sensor wiring com- partment. Set your coach light onto the sensor and proceed to the adjustments on the next page.

595-5657-04

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Operation FeaturesSome codes require installation by a qualified electrician RequirementsDualBrite Dimmer Control InstallationMode Switching Summary Testing SpecificationsTroubleshooting Guide Securing Brass and Plastic Post LampsTechnical Service No Service Parts Available for this ProductRequisitos FuncionamientoCaracterísticas Luz de Adorno DualBrite InstalacionResumen de las modalidades del Interruptor Advertencia Desconecte la energía en el disyuntorPrueba EspecificacionesCómo Asegurar las Lámparas de Poste de Latón y de Plástico Guia DE Investigacion DE AveriasServicio Técnico No hay piezas de servicio disponibles para este productoExigences FonctionnementCaractéristiques Résumé du mode de commutation Minuterie DualBriteMDEssais Fiche TechniqueFixation des Lampadaires en laiton Et en plastique Guide DE Dépannage Symptôme Cause PossibleService Technique Aucune pièce de rechange n’est disponible pour ce produit

SL-4100 specifications

The Heath Zenith SL-4100 is a versatile and advanced motion sensor light that combines security, convenience, and energy efficiency. Designed for homeowners who want an efficient solution for outdoor lighting, the SL-4100 stands out with its array of features and technologies.

One of the key characteristics of the SL-4100 is its robust motion detection capability. Equipped with a passive infrared (PIR) sensor, it can detect motion up to 30 feet away and has a coverage area of 180 degrees. This extensive detection range ensures that your property is well monitored, providing peace of mind when it comes to safety. The sensor is designed to minimize false triggers caused by pets or other small movements, enhancing its reliability.

The SL-4100 also features adjustable sensitivity and time settings, allowing users to customize the light's response to detected motion. This means you can set how long the light stays on after activation, which can be adjusted anywhere from 1 to 10 minutes. This flexibility caters to individual preferences and can help save on energy costs by minimizing unnecessary activation.

A standout technological feature is its built-in dusk-to-dawn sensor. This innovation ensures that the light only activates at night when motion is detected, further conserving energy and increasing its lifespan. When combined with its weather-resistant design, the SL-4100 is built to endure various outdoor conditions, making it ideal for patios, entryways, and driveways.

Installation is straightforward, with the unit being designed for wall or eave mounting. Its sleek and contemporary design allows it to blend seamlessly with existing home decor, enhancing aesthetic appeal while serving a practical purpose. Additionally, the SL-4100 uses LED technology, providing bright illumination while consuming less electricity than traditional incandescent bulbs.

In conclusion, the Heath Zenith SL-4100 motion sensor light is an exceptional choice for anyone looking to enhance outdoor security and lighting convenience. With its advanced motion detection, customizable settings, weather-resistant construction, and energy-efficient LED illumination, it reflects the best of modern lighting technology, making homes safer and more visually pleasing.
Top Page Image Contents