Heath Zenith SL-4100 warranty Testing, Specifications

Green sensor
wire to Green or	Red sensor
bare fixture wire
	wire to Black
	fixture wire
White sensor
wire to White	Black sensor
fixture wire
	wire to Black
	post wire

TESTING

Turn on the circuit breaker and light switch.

Note: Sensor has a 1 1/2 minute warm up pe- riod before it will detect motion.When first turned on wait 1 1/2 minutes.

Avoid aiming the control at:

•Pools of water or objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering.

•Areas where pets or traffic may trigger the control.

•Nearbylarge,light-coloredobjectsreflect- ing daylight may trigger the shut-off feature. Do not point other lights at the sensor.

Green sensor	White sensor
wire to Green or
	wire to White
bare post wire
	post wire
SPECIFICATIONS

Range	Up to 30 ft. (9.1 m)
	[varies with surround-
	ing temperature]
Sensing Angle	Up to 150°
Sensor Capacity	Up to 360 Watts (3.0
	A.) Maximum Tungsten
	Incandescent
Power
Requirements	120 VAC, 60 Hz
Operating Modes	TEST, AUTO and
	MANUAL OVERRIDE
Time Delay	1, 5, 20 minutes
Sensitivity	Adjustable
DualBrite® Timer	Off, 3, 6 hours, Dusk-
	to-Dawn

HeathCo LLC reserves the right to discon- tinue products and to change specifications at any time without incurring any obligation to incorporate new features in products pre- viously sold.

150°

5 ft.

(1.5 m)

30ft.

(9.1 m)

Maximum Range	Maximum
	Coverage Angle

The detector is less sensitive to motion di- rectly towards it and more sensitive to across motion.

MotionMotion

Sensor

Least Sensitive Most Sensitive

595-5657-04