Heath Zenith SH-5512 manual Wire the Light Control, Mount the Light Control, White to Black to

Page 3

Wire the Light Control

WARNING: Turn power off at circuit breaker or fuse.

Remove the existing light fixture.

Install mounting strap to junction box using screws appropriate for your junction box.

The plastic hanger can be used to hold the fixture while wiring. The small end of the plastic hanger can be threaded through the hole in the center of the cover plate. The small end then goes into one of the slots on the mounting strap.

Thread all fixture wires through the large holes in the gasket as shown.

Connect the junction box wires to the light fixture wires as shown. Twist together and secure with wire connectors.

Mount the Light Control

Place the mounting bolt through the front of the junction box cover. Push the small gasket hole over the mounting screw.

Make sure the wire connectors and wires are inside the junction box. Align the mounting screw with the center hole in the mounting strap.Secure the fixture to the mounting strap.

Push the rubber plug over the mounting screw.

Keep bulbs at least 1" (25 mm) from the sensor.

Mounting

Strap

White to

White

Black to

Black

Gasket

Rubber

Plug

Mounting

Bolt

Push the rubber plug firmly into place.

If not installed on a weatherproof box, caulk the wall plate and mounting surface with silicone

Adjust the bulb holders by loosening the lock nuts but do not rotate the bulb holders more than 180° from the factory setting.

Connect any fixture ground wire(s) and the cover plate ground screw to the junction box ground wire.

598-1160-03

Image 3
Contents Requirements FeaturesPackage Contents OperationDualBrite Timer InstallationBulb Installation and Replacement Mode Switching SummaryWire the Light Control Mount the Light ControlWhite to Black to Secure the sensor head by tightening the clamp screw Test and AdjustmentTurn on the circuit breaker and light switch Avoid aiming the control atTroubleshooting Guide SpecificationsNo Service Parts Available for this Product TEN Year Limited WarrantyContenidos del Paquete FuncionamientoDualBrite CaracterísticasCuidado Para evitar los peligros de incen Dio o quemazón InstalacionInstalación y Cambio de la Bombilla Luz de Adorno DualBriteBlanco a Blanco Conecte el Control de LuzInstale el Control de Luz Advertencia Desconecte la energía en el disyuntorPrueba Y Ajuste Guia DE Investigacion DE Averias EspecificacionesServicio Técnico Garantía Limitada a 10 AñosNo hay piezas de servicio disponibles para este producto Exigences FonctionnementCaractéristiques Contenu de l’emballageInstallation et Remplacement de la Lampe Résumé du mode de commutationMinuterie DualBriteMD Montage de la Commande D’Éclairage Blanc / blancNoir / noir Sur de grands objets clairs à proximité qui réflé Essais ET RéglagesÉviter de pointer l’appareil Pidement, tels que des bouches dair chaud et desGuide DE Dépannage Fiche TechniqueService Technique Garantie Limitée DE DIX ANSAucune pièce de rechange n’est disponible pour ce produit 598-1160-03 Date of Purchase

SH-5512 specifications

The Heath Zenith SH-5512 is a high-quality motion sensor light fixture that has gained popularity among homeowners for its advanced features and reliable performance. Designed to enhance security while providing convenience, this model is particularly suitable for outdoor settings.

One of the standout features of the SH-5512 is its motion detection capability. The light is equipped with a dual-element passive infrared sensor, allowing it to detect movement up to 180 degrees and at distances of up to 70 feet. This wide detection range ensures that the fixture can capture any potential intruders in the vicinity, triggering the light to turn on and provide a welcomed illumination.

The adjustable settings on the SH-5512 allow for a degree of customization that enhances its functionality. Users can easily modify the motion sensitivity, light duration, and daytime settings. For instance, the light duration can be set anywhere from 10 seconds to 5 minutes, accommodating different needs based on the area being monitored. This flexibility ensures that the fixture is optimized for various environments, whether it be a walkway, driveway, or backyard.

Moreover, the SH-5512 features a sleek and modern design, making it an appealing addition to any home. The unit is available in a durable weather-resistant housing that can withstand the elements, ensuring long-term performance without sacrificing aesthetics. It offers a lumens output of 1,000, providing ample illumination that not only enhances safety but also improves visibility during nighttime hours.

Another noteworthy characteristic is its energy efficiency. The Heath Zenith SH-5512 utilizes LED technology, which consumes less power compared to traditional incandescent bulbs. This energy-efficient design not only lowers electricity bills but also contributes to a more sustainable home environment.

Installation of the SH-5512 is straightforward, thanks to its user-friendly design. Homeowners can confidently set it up, whether they are professionals or DIY enthusiasts. With its combination of modern design, reliable technology, and user-centric features, the Heath Zenith SH-5512 motion sensor light fixture stands out as an excellent choice for enhancing outdoor security and convenience.