Test and Adjustment

Clamp

Screw

Ball

Joint

Aim Sensor

Down for Short

Coverage

Aim Sensor

Higher for Long

Coverage

❒Turn on the circuit breaker and light switch.

NOTE: Sensor has a 1 1/2 minute warm up period before it will detect motion. When first turned on, wait 1 1/2 minutes.

NOTE: Meets the ENERGY STAR® guidelines when DualBrite® function is off and ON-TIME is 1 or 5 minutes and when used with 120 W Max bulbs.

❒Turn the RANGE control to the medium position (halfway between MIN and MAX), DualBrite® to OFF, and the ON-TIME control to the TEST position.

MAX		ON-TIME	DUAL BRITE™
	O	ON-TIME	DUAL BRITE™
	B
	O
	S
	T
MIN	TEST 1 5 20		OFF 3 6 DUSK TO
RANGE	TEST 1 5 20		OFF 3 6 DUSK TO
RANGE		MINUTES	HOUR DAWN

Bottom of Sensor

Avoid aiming the control at:

•Objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering.

•Areas where pets or traffic may trigger the control.

•Nearby large, light-colored objects reflecting light may trigger the shut-off feature. Do not point other lights at the sensor.

240°

8 ft.
(2.4 m)	DualZone™
	DualZone™
DualZone™	70 ft. 100 ft.
DualZone™	(21 m) (30.5 m)
	Boosted	Maximum
		Maximum
Maximum Range		Coverage Angle

NOTE: If fixture is mounted higher than 8 ft.(2.4 m), aiming the sensor down will reduce coverage distance.

The detector is less sensitive to motion directly towards it.

MotionMotion

DualZone™	Sensor	DualZone™
	Sensor
Least Sensitive		Most Sensitive

❒ Loosen the clamp screw in the sensor ball joint and gently rotate the sensor.

❒ Walk through the coverage area noting where you are when the lights turn on (also, the LED will flash several times whenmotionisdetected).Move the sensor head up, down, or sideways to change the cover- age area. Keep the sensor at least 1" (25 mm) away from the bulbs.

❒Adjust the RANGE as needed. RANGE set too high may

increase false triggering.

❒ Secure the sensor head by tightening the clamp screw.

Do not overtighten the screw.

❒Set the amount of TIME you want the lights to stay on after motion is detected (1, 5, or 20 minutes).

❒Set the DualBrite® switch to the amount of time after dusk you want the lights on at low level (Off, 3, 6 Hrs., Dusk-to-Dawn).

WARNING - Risk of fire. Do not aim the bulbs at a combustible surface within 3 ft. (1 m).

NOTE: DualZone™ is a new zone of detection which was added as an option to select Heath®/Zenith motion sensing products. This feature adds a zone of detec- tion under the motion sensor. DualZone™ requires no additional adjustment and operates in conjuction with the forward-looking sensor.

598-1160-03

SH-5512 specifications

The Heath Zenith SH-5512 is a high-quality motion sensor light fixture that has gained popularity among homeowners for its advanced features and reliable performance. Designed to enhance security while providing convenience, this model is particularly suitable for outdoor settings.

One of the standout features of the SH-5512 is its motion detection capability. The light is equipped with a dual-element passive infrared sensor, allowing it to detect movement up to 180 degrees and at distances of up to 70 feet. This wide detection range ensures that the fixture can capture any potential intruders in the vicinity, triggering the light to turn on and provide a welcomed illumination.

The adjustable settings on the SH-5512 allow for a degree of customization that enhances its functionality. Users can easily modify the motion sensitivity, light duration, and daytime settings. For instance, the light duration can be set anywhere from 10 seconds to 5 minutes, accommodating different needs based on the area being monitored. This flexibility ensures that the fixture is optimized for various environments, whether it be a walkway, driveway, or backyard.

Moreover, the SH-5512 features a sleek and modern design, making it an appealing addition to any home. The unit is available in a durable weather-resistant housing that can withstand the elements, ensuring long-term performance without sacrificing aesthetics. It offers a lumens output of 1,000, providing ample illumination that not only enhances safety but also improves visibility during nighttime hours.

Another noteworthy characteristic is its energy efficiency. The Heath Zenith SH-5512 utilizes LED technology, which consumes less power compared to traditional incandescent bulbs. This energy-efficient design not only lowers electricity bills but also contributes to a more sustainable home environment.

Installation of the SH-5512 is straightforward, thanks to its user-friendly design. Homeowners can confidently set it up, whether they are professionals or DIY enthusiasts. With its combination of modern design, reliable technology, and user-centric features, the Heath Zenith SH-5512 motion sensor light fixture stands out as an excellent choice for enhancing outdoor security and convenience.