Listening to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation.
Presetting Stations | GB | ||
|
|
| |
You can store up to: |
|
|
|
15 FM stations | • FM | Frequency Modulation |
|
15 AM stations | • AM | Medium Wave |
|
Remote Control Unit
Example: Presetting FM 89.1 in the memory
1 Press TUNER/
BAND button.
2 Tune in to the desired station.
Press the TUNER/
1BAND button and select the FM band.
2 Press TUNING/CH
to select "89.10".
3 Press the TUNER MEMORY button.
•The selection toggles back and forth between "FM ➝ AM" each time the TUNER/BAND button is pressed.
Automatic Tuning 1
Automatic Tuning 2
Manual Tuning
When 
is pressed, a preset broadcast station is selected.
Press and hold TUNING/CH to automatically search for active broadcasting stations.
Briefly press TUNING/CH to increase or decrease the frequency incrementally.
•Each time the button is pressed, the band switches between "FM ➝ AM".
TITLE | CHAP PRGM RDS RT | ST TUNED |
kHz MHz
•Refer to Step 2 on page 77 to automatically or manually tune in to a station.
TITLE | RDS RT | ST TUNED |
kHz MHz
•“PRGM” flashes in the display.
TITLE | RDS RT | ST TUNED |
|
| kHz |
|
| MHz |
Main Unit
Press the Function
1 button to select the desired band (FM, AM).
2 Select a broadcast station.
Automatic Tuning 1 Press the STOP ( 
)
button to select
PRESET and then press 
button to select the preset station.
Automatic Tuning 2 Press the STOP ( 
) button
to select "MANUAL" and
then press and hold 
button to automatically search the band.
Manual Tuning Press STOP ( 
) to select MANUAL and then briefly
press 
to tune in to a lower or higher frequency.
| Press |
|
|
|
| 5 |
| Press the TUNER | 6 |
| To preset another |
|
|
|
|
| |||||||
4 to select preset |
| MEMORY button |
| station, repeat | |||||||
number. |
|
| again. |
|
| steps 2 to 5. | |||||
• You can select between 1 and | • Press the TUNER MEMORY button before |
|
|
| |||||||
15. |
|
|
|
|
| ‘PRGM’ disappears from the display. |
|
|
| ||
•‘PRGM’ disappears from the display and the station is stored in memory.
TITLE | RDS RT | ST TUNED | TITLE | RDS RT | ST TUNED |
|
| kHz |
|
| kHz |
|
| MHz |
|
| |
|
|
|
| MHz | |
|
|
|
|
|
|
|
| RADIO |
Note | • | Up to 15 stations (30 total ; 15FM, 15AM) can be saved in memory. | OPERATION |
| |||
|
| If you save more than 15 stations, the oldest station previously saved is removed and a |
|
|
| new station is stored in its place. |
|
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•Each time the button is pressed, the sound switches between "STEREO" and "MONO".
•In a poor reception area, select MONO for a clear,
To tune in to a preset station, press 
on the remote control to select a channel.
77 | 78 |