Front Speaker (R) 
Front Speaker (L)
Connecting the Video Out to TV | GB |
|
Choose one of the three methods for connecting to a TV.
Center Speaker
METHOD 2
METHOD 1
METHOD 3
Red | Green |
| White |
METHOD 1 Composite Video ............... Good Quality
CONNECTIONS
| Purple |
Gray | Blue |
| Subwoofer |
Rear Speaker (R) | Rear Speaker (L) |
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the sys- tem to the VIDEO IN jack on your television.
METHOD 2 Scart ............... Better Quality
If you television is equipped with an SCART input, connect an Scart Jack (not supplied) from the AV OUT jack on the back panel of the system to the SCART IN jack on your television.
VIDEO SELECT Function
Press and hold VIDEO SEL. button on the remote control for over 5 seconds.
• "COMPOSITE" or "RGB" will appear in the display. |
At this time, press the VIDEO SEL. button shortly to select between "COMPOSITE" and "RGB". |
• If Scart (RGB Input) is equipped for your TV, press VIDEO SEL. button to select RGB mode. |
You can get a better picture quality by using Scart setting. |
Back of the Speakers
1 Press down the terminal | 2 Insert the black wire into | ||||||
tab on the back of the | the black terminal | ||||||
speaker. | the gray wire into the gray | ||||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
| (+) terminal, and then |
|
|
|
|
|
|
| release the tab. |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Back of the Main Unit
3Connect the connecting plugs to the back of the DVD player.
•Make sure the colors of the speaker terminals match the colors of the connecting plugs.
• If Scart (RGB Input) is not equipped for your TV, press VIDEO SEL. button to select COMPOSITE |
mode. |
METHOD 3 Component (Progressive Scan) Video ............... Best Quality
If your television is equipped with Component Video inputs, connect a component video cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the cor-
Black | Gray |
responding jacks on your television.
Note | • When the Progressive scan mode is selected, the VIDEO and SCART outputs |
do not feed any signal.
13 | 14 |