Heath Zenith 2LBL9 Troubleshooting Guide, Regulatory Information, Symptom Possible Cause Solution

Page 8

Troubleshooting Guide

SYMPTOM

POSSIBLE CAUSE

SOLUTION

 

 

 

 

 

Device does not come on.

1.

Circuit breaker or fuse is turned off.

1.

Verify circuit breaker or fuse is turned

 

 

 

 

on.

 

2.

Switch on device is turned off.

2.

Verify switched device is turned on.

 

3.

Interrupted by another device.

3.

Change codes on transmitter and

 

 

 

 

receiver units.

 

4.

Does not respond immediately after

4.

Wait for 90 second initialization period

 

 

installation.

 

(remote motion sensor).

 

5.

Signals from transmitter are being

5.

Check for metal objects that could

 

 

blocked, or transmitter is out of range.

 

block the signal, or reposition the

 

 

 

 

transmitter.

 

6.

Weak battery in the transmitter.

6.

Check battery charge and replace if

 

 

 

 

necessary.

 

7.

Dip switches on transmitter and receiver

7.

Verify code settings on transmitter and

 

 

units do not match.

 

receiver units are set the same.

 

8.

Device is defective.

8.

Test using different device.

 

 

 

 

 

Device does not turn off.

1.

Same as 5, 6, and 7 above.

1.

Same as 5, 6, and 7 above.

 

 

 

 

 

Device comes on randomly.

1.

Short term power line failure.

1.

Next transmission from transmitter

 

 

 

 

will reset receiver to correct state.

 

2.

Another transmitter on the same

2.

Change codes on transmitter and

 

 

frequency.

 

receiver units.

 

 

 

 

 

Regulatory Information

This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.

The user is cautioned that changes or modifications not expressly approved by the party responsible for regulatory compliance could void the user’s authority to operate the equipment.

1 Year limited warranty:

Should this product fail to perform satisfactorily due to a defect or poor workmanship within one year of date of purchase, return it to the place of purchase and it will be replaced, free of charge. Incidental or consequential damages are excluded from this war- ranty. Light bulbs are not covered.

Manufactured for Grainger International, Inc.

Lake Forest, IL 60045

598-1326-01

Image 8
Contents Features Your particular productFor USE only with 120 volt incandescent or halogen bulbs Lighting, or any other electrical devicesCode Settings Code Switch LocationsExample 1 Code Settings, System Example 2 Code Settings, SystemSelect Night or 24 Hour Mode Installing BatteriesInstalling Motion Sensor Motion SensorCheck Operation and Adjustment Adjusting Motion Sensor CoverageMotion Sensor Coverage Area Motion Sensor ControlsWiring Halogen Security Light Receiver InformationHalogen Security Light 2LBN1 Lamp ModesBulb Installation White Wiring FloodlightFloodlight 2LBL9 Troubleshooting Guide Symptom Possible Cause SolutionYear limited warranty Regulatory InformationPágina CaracteristicasAdvertencias Calibraciones DEL Código Ubicaciones DE LOS Interruptores DE Circuito ImpresoEjemplo 1 Calibraciones del código, sistema Ejemplo 2 Calibraciones del código, sistemaDetector DE Movimiento Instalación del Detector de MovimientoSeleccione modo nocturno o modo de 24 horas Instalación de las bateríasRevisión de la operación y de la regulación Controles del Detector de Movimiento deÁrea de Cobertura del Detector de Movimiento de Sensibilidad del Detector de MovimientoInformación DEL Receptor LUZ Halógena DE Seguridad 2LBN1Fases De Lámpara Cableado de la luz halógena de seguridadInstalación de bombilla Cuidado Para evitar los peligros de incendio o QuemazónReflector 2LBL9 Advertencia Riesgo de incendio. No apunteTapón de Negro CauchoGuía de Análisis de Averías Información RegulatoriaSíntoma Causa Probable Solución Garantía limitada a un 1 añoVotre produit CaractéristiquesDu guide de référence Emplacement DES MICRO-INTERRUPTEURS Réglage DES CodesExemple 1 Réglage des codes, System Exemple 2 Réglage des codes, systèmeInstallation Du Détecteur De Mouvement Sélection du mode de nuit ou du mode 24 heuresInstallation des piles Détecteur DE MouvementCommandes du détecteur de mouvement sur Vérification du fonctionnement et du réglageZone de couverture du détecteur de mouvement sur Sensibilité du détecteur de mouvementInformations SUR LE Récepteur Luminaire DE Sécurité Halogène 2LBN1Modes D’Éclairage Raccordement du luminaire de sécurité à halogène SuiteInstallation De L’ampoule DincendieProjecteur 2LBL9 Câblage du projecteurSymptôme Cause Possible Solution Guide DE DépannageRenseignements de règlements Garantie limitée d’un an

2LBN1, 2LBL9 specifications

Heath Zenith is a renowned brand in the home lighting and security industry, and their models 2LBL9 and 2LBN1 are standout products that exemplify their commitment to quality and innovation. These motion-sensing outdoor lights are designed for convenience, security, and energy efficiency, making them ideal for both residential and commercial applications.

The Heath Zenith 2LBL9 features a sleek and modern design, tailored to fit seamlessly into various architectural styles. With a robust construction, it withstands various weather conditions, ensuring durability and longevity. This model incorporates a powerful motion sensor that detects movement within a specified range, offering an effective security solution for homeowners. When the sensor is triggered, the light illuminates automatically, enhancing visibility and deterring unwanted intruders.

Similarly, the 2LBN1 model shares many of the same features but introduces additional functionalities. One of its standout characteristics is the adjustable time and sensitivity settings. Users can customize the duration the light stays on after detecting movement, ranging from a few seconds to several minutes. The sensitivity can also be fine-tuned, allowing it to detect motion from varying distances, making it adaptable to different environments such as driveways, backyards, and pathways.

Both models employ energy-efficient LED technology, significantly reducing energy consumption compared to traditional incandescent bulbs. This design not only helps in lowering electricity bills but also extends the lifespan of the lights, providing reliable performance over many years.

In addition, these models are equipped with a dusk-to-dawn feature, automatically turning on at sunset and off at sunrise. This ensures that your property remains illuminated during nighttime without requiring manual intervention.

The installation process is straightforward, designed to accommodate users with varying levels of DIY experience. Both models come with clear instructions, making them easy to mount on walls or ceilings in outdoor areas.

Overall, the Heath Zenith 2LBL9 and 2LBN1 motion-sensing lights are excellent choices for anyone looking to enhance their outdoor security while also benefiting from energy-efficient lighting solutions. With their advanced features and reliable performance, they stand out as top contenders in the market of outdoor lighting solutions.