Heath Zenith 5310 manual Test and Adjustment, Specifications, Maximum Range, Least Sensitive

Page 3
Aim Sensor
Higher for Long
Coverage

TEST AND ADJUSTMENT

Turn on the circuit breaker and light switch.

NOTE: Sensor has a 1 1/2 minute warm up period be- fore it will detect motion. When first turned on or when switching modes wait 1 1/2 minutes.

Turn the RANGE control to the mid position and the ON-TIME control to the TEST position.

RANGE

ON-TIME

10 5 1 TEST

MIN

MAX

 

Bottom of Sensor

Avoid aiming the sensor at:

Objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering.

Areas where pets or traffic may trigger the control.

Nearby large, light-colored objects reflecting light may trigger the shut-off feature. Do not point other lights at the sensor.

180°

8 ft.

(2.4 m)

70 ft.

(21 m)

Maximum Range

Maximum

 

Coverage Angle

The detector is less sensitive to motion directly towards it.

Loosen the clamp screw in the

Clamp

sensor ball joint and gently

Screw

rotate the sensor.

 

Walk through the coverage

Ball

area noting where you are

Joint

when the lights turn on. Move

 

the sensor head up, down,

 

or sideways to change the

Aim Sensor

coverage area.

Adjust the RANGE as needed.

Down for Short

RANGE set too high may

Coverage

increase false triggering.

 

Secure the sensor head’s

aim by tightening the clamp screw. Do not overtighten the screw.

Set the amount of TIME you want the lights to stay on after

motion is detected (1, 5, or 10 minutes).

SPECIFICATIONS

Range . . . . . . . Up to 70 ft. (21 m) [varies with surrounding temperature]

Sensing Angle. . . . Up to 180°

Electrical Load. . . . Up to 500 Watt Maximum Incandescent

Power Requirements. . 120 VAC, 60 Hz

Operating Modes. . . TEST, AUTO and MANUAL

MODE

Time Delay . . . . . 1, 5, 10 minutes Replacement lamp. . . T 500W (or less) halogen 120

VAC

HeathCo LLC reserves the right to discontinue prod- ucts and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold.

MotionMotion

 

Sensor

Least Sensitive

Most Sensitive

598-1323-01

Image 3
Contents Model FeaturesMode Switching Summary OperationMount the Light Control InstallationWire the Light Control Bulb Installation and Re-lampingLeast Sensitive Test and AdjustmentSpecifications Maximum RangeTroubleshooting Guide No Service Parts Available for this ProductTEN Year Limited Warranty Requisitos FuncionamientoModelo CaracterísticasInstalación y cambio de bombilla InstalacionConecte el control de luz Instale el control de luzCobertura Máxima Prueba Y AjusteEspecificaciones Angulo deGarantía Limitada a 10 Años Guia DE Investigacion DE AveriasServicio Técnico No hay piezas de servicio disponibles para este productoExigences FonctionnementModèle CaractéristiquesBlanc /blanc Montage De La Commande D’ÉclairageInstallation et remplacement de ’ampoule Noir / noirLe moins sensible Essais ET RéglagesFiche Technique Portée maximale Angle deService Technique Guide DE DépannageGarantie Limitée DE 10 ANS

5310 specifications

The Heath Zenith 5310 is a prominent choice in the realm of motion-activated outdoor lighting. Engineered for both functionality and durability, this versatile fixture caters to residential needs, providing security and illumination where it's most needed.

One of the main features of the Heath Zenith 5310 is its advanced motion sensor technology. It is equipped with a passive infrared (PIR) sensor that detects movement within a particular range. This sensor can cover an impressive distance of up to 30 feet, allowing it to effectively monitor larger areas. Additionally, the detection angle is approximately 180 degrees, ensuring that no movement goes unnoticed. This is particularly beneficial for homeowners seeking to enhance security around entryways, driveways, and garages.

The light output of the Heath Zenith 5310 is also noteworthy. With a bright LED bulb, it provides adequate illumination while being energy-efficient. The LED technology not only helps to reduce electricity bills but also promotes longevity, as the bulbs have a longer life span compared to traditional incandescent bulbs. This results in minimal maintenance and a lower environmental footprint.

Another significant characteristic of the Heath Zenith 5310 is its adjustable settings. Users can customize the duration for which the light remains on after detecting movement, with options ranging from a few seconds to several minutes. The sensitivity of the motion detector can also be fine-tuned to suit specific environments, allowing for optimal performance regardless of external conditions.

The design of the Heath Zenith 5310 is rooted in practicality and aesthetics. It typically features a sleek and modern appearance that can blend seamlessly with various architectural styles. The durable housing is weather-resistant, ensuring that the fixture can withstand harsh outdoor conditions such as rain, snow, and extreme temperatures, making it a reliable choice for year-round use.

Installation is straightforward, thanks to its user-friendly design. Most homeowners find that they can install the fixture themselves without the need for professional assistance. This adds to the overall appeal of the Heath Zenith 5310, as it combines cutting-edge technology with ease of use, delivering security and convenience in one package.

In summary, the Heath Zenith 5310 stands out as an excellent option for those looking to enhance their outdoor lighting. With its motion detection capability, energy-efficient LED technology, customizable settings, and durable design, it caters to both security and aesthetic needs, making it a smart investment for any homeowner.