Heath Zenith 5598 owner manual Troubleshooting Guide, Technical Service, Desa Specialty Products

Page 6

TROUBLESHOOTING GUIDE

If you experience a problem, follow this guide.

SYMPTOM

POSSIBLE CAUSE

SOLUTION

 

 

 

 

 

Lights will not come

1.

Light switch is turned off.

1.

Turn light switch on.

on.

2.

Lamp is loose or burned out.

2.

Check lamp and replace if burned out.

 

3.

Fuse is blown or circuit breaker is turned

3.

Replace fuse or turn circuit breaker on.

 

 

off.

 

 

 

4.

Daylight turn-off is in effect.

4.

Recheck after dark.

 

5.

Incorrect circuit wiring, if this is a new

 

 

 

 

installation.

5.

Verify wiring is correct.

 

 

 

 

 

Lights come on in

1.

Light control may be installed in a relatively

1.

The fixture is operating normally under these

daylight.

 

dark location.

 

conditions.

 

2.

Light control is in TEST.

2.

Set control switch to 1, 5, or 10 minutes.

 

 

 

Lights come on for no

Light control may be sensing small animals or

Reduce sensitivity.

apparent reason.

automobile traffic.

 

 

 

 

 

Lights stay on continu-

The sensor may be picking up a heat source

Reduce sensitivity.

ously.

like an air vent, dryer vent, or brightly painted,

 

 

 

heat-reflective surface.

 

 

 

 

 

Lights flash on and

Light control is in the TEST mode and warm-

Flashing is normal under these conditions.

off.

ing up.

 

 

 

 

 

 

 

Technical Service

Please call 1-800-858-8501 (English speaking only) for assistance before returning

product to store.

If you experience a problem, follow this guide. You may also want to visit our Web site at: www.desatech. com. If the problem persists, call* for assistance at 1-800-858-8501(English speaking only), 7:30 AM to 4:30 PM CST (M-F). You may also write* to:

DESA Specialty Products

P.O. Box 90004, Bowling Green, KY 42102-9004 ATTN: Technical Service Specialty Products

*If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, and Place of Purchase.

No Service Parts Available for this Product

FIVE YEAR LIMITED WARRANTY

This is a “Limited Warranty” which gives you specific legal rights.You may also have other rights which vary from state to state or province to province.

For a period of five years from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected at no charge to you.

Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs, batteries, and other expendable items are not covered by this warranty. Unauthorized service or modification of the product or of any furnished component will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges.

This warranty covers only DESA Specialty Products assembled products and is not extended to other equipment and components that a customer uses in conjunction with our products.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY, REPRESENTATION OR CONDITION OF MERCHANT ABILITY OR THAT THE PRODUCTS ARE FIT FOR ANY PARTICULAR PURPOSE OR USE, AND SPECIFICALLY IN LIEU OF ALL SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND THERE SHALL BE NO LIABILITY ON THE PART OF DESA SPECIALTY PRODUCTS FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUD- ING BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS, WHETHER OR NOT FORESEEABLE. Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Proof of purchase is required for warranty claims.

598-1314-00

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Requirements FeaturesLantern Assembly UnpackingInstallation WiringOptional Wiring MasterSlaveRecommended Grounding Method Turn on the circuit breaker and light switch Final AssemblyTesting and Adjustments Set ON-TIME switch to Test Sensitivity dial to MidwayAdjustment of Coverage Area Manual ModeMode Switching Summary SpecificationsNo Service Parts Available for this Product Troubleshooting GuideTechnical Service If you experience a problem, follow this guideRequisitos CaracterísticasMontaje DEL Farol DesempaqueInstalacion CableadoAdvertencia Desconecte la energía en el cortacircuito Conexion Alterna Maestra EsclavaPruebas Y Ajustes Conecte el disyuntor y el interruptor de la luzModo Manual Resumen de las modalidades Del interruptorOperación Regulación DEL Área DE CoberturaEspecificaciones Guia DE Investigacion DE AveriasManual Servicio Técnico No hay piezas de servicio disponibles para este productoDéballage CaractéristiquesExigences Assemblage DE LA LanterneCâblage Câblage Facultatif Maître SatelliteEssais ET Réglages Installez une ampoule à culot moyen maximum de 100 WAssemblage Final Ré-enclenchez le disjoncteur puis ouvrez l’interrupteurPriorité Manuelle Résumé du mode de commutationFonctionnement Réglage DE LA Zone DE CouvertureFiche Technique Guide DE DépannageService Technique Garantie Limitée DE 5 ANSAucune pièce de rechange n’est disponible pour ce produit

5598 specifications

The Heath Zenith 5598 is a state-of-the-art motion-activated security light designed to enhance safety and provide illumination for residential and commercial properties. This innovative product embraces advanced technology and user-friendly features, making it an excellent addition to any security system.

One of the most prominent features of the Heath Zenith 5598 is its powerful 180-degree motion sensor, which allows the light to detect movement within a range of up to 70 feet. This high sensitivity ensures that the light activates when movement is detected within its field of vision, illuminating your space and deterring potential intruders. The adjustable sensor also allows users to customize the detection distance and sensitivity levels according to their specific needs.

Another significant characteristic of the Heath Zenith 5598 is its impressive brightness, producing an output of 1200 lumens. This level of brightness is sufficient to light up driveways, patios, and entryways, ensuring that these areas are well-lit and secure after dark. The energy-efficient LED bulbs not only provide intense illumination but also consume considerably less energy than traditional incandescent bulbs, translating to lower electricity bills and a reduced environmental footprint.

The installation process of the Heath Zenith 5598 is straightforward, allowing homeowners and business owners to set up the light quickly without requiring professional help. It comes with all necessary mounting hardware and a user manual to guide users through the installation process. Additionally, the durable and weatherproof construction of the unit ensures that it can withstand various environmental conditions, making it suitable for outdoor use.

In terms of customization, the Heath Zenith 5598 includes adjustable features such as the light duration setting, which allows users to specify how long the light remains on after being activated. This can be set for intervals ranging from 1 to 10 minutes. The dusk-to-dawn sensor ensures that the light operates only during nighttime, conserving energy during daylight hours.

In summary, the Heath Zenith 5598 motion-activated security light combines cutting-edge technology, impressive brightness, and user-friendly features, making it an ideal choice for anyone looking to enhance their property's security and visibility. Its ease of installation, customizable settings, and energy efficiency further solidify its value as a reliable security solution.
Top Page Image Contents