Selecting the Turbo Function
Control Panel
You can select the Turbo Function if you want to cool or heat your room in the fastest way. After the 30 - minute operation with the maximum setting, it returns to the previous setting.
1If necessary, press the 
(On/Off) button.
Result: ◆ The operation indicator on the indoor unit lights up.
◆The air conditioner starts up in the mode you selected last.
◆The indoor unit beeps.
2Press the 
button.
Result: ◆ The temperature and fan settings are adjusted automatically.
◆The fan speed indicator turns round with the maximum setting and speed.
◆The air conditioner cools or heats the room as quickly as possible.
◆After 30 minutes, the air conditioner is reset automatically to the previous setting.
◆You can select the Turbo function in the Auto, Cool and Heat mode. If you select this function in the Dry or Fan mode, the mode changes to the Auto mode.
3Press the 
button again to stop the Turbo Function before the end of the
Result: The air conditioner is reset automatically to the previous setting.
4To control the airflow direction, refer to page 19.