Setting the Clock

DEMO/DIMMER function

Loading and Changing Compact

Discs

To replay the CD/MP3/WMA-CD

ENG

All functions available on the system can be viewed on the display and the display's brightness can be switched between "on" and "off".

1	Press the DEMO button.
	Result: All functions available on the system appear on the front
	panel display.
	Each of these are explained in detail in this guide. Please refer to
	the relevant section.
2	Press the DIMMER button.
2	Result: The Dimmer function is selected and the display darkens.
3	Press the DIMMER button once again to brighten the front panel dis-
	play.

A display brightness control can only be performed while the system power is on.

POWER	OPEN/	DISC
POWER	CLOSE	SKIP
	CLOSE	SKIP
TIMER	TIMER/CLOCK PROGRAM/SET
ON/OFF
SLEEP	MO/ST	MEMORY
+10	DEMO	DIMMER
RDS DISPLAY	1	2,3
RDS DISPLAY	PTY SEARCH	REPEAT

P.SOUND P.BASS

USB/MP3-CD/CD

Your system is equipped with a clock which allows you to turn your system on and off automatically.

You should set the clock:

When you first purchase the mini-compact system

After a power failure

After unplugging the unit

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing STANDBY/ON.
2	Press TIMER/CLOCK twice.
	Result: CLOCK is displayed.
3	Press ENTER/PRGM..
	Result: The hour flashes.
4
4	To...	Turn the MULTI JOG knob to the...
	Increase the hours	Right
	Decrease the hours	Left
5	When the correct hour is displayed, press ENTER/PRGM..
	Result: The minutes flash.
6
6	To...	Turn the MULTI JOG knob to the...
	Increase the minutes	Right
	Decrease the minutes	Left

7 When the correct time is displayed, press ENTER/PRGM..

Result: The clock starts and is displayed, even when the system is in standby mode.

You can display the time, even when you are using another function, by pressing TIMER/CLOCK once.

You can also use / buttons on the panel front or TUN-

ING / on the remote control to instead of MULTI JOG knob in step 4, 6.

1	3,5,7
	3,5,7
	4,6
2
4,6	4,6

The CD disc changer can contain up to three 12 cm or 8 cm

compact discs without using an adapter.

Never force the compact disc carrousel when opening and closing the compartment.

Never press down or place objects on the carrousel.

Always treat your compact discs with care; refer, if necessary, to the section entitled “Precautions When Using Compact Discs” on

page 22 .

1	Switch the system on by pressing STANDBY/ON.
2	Press the OPEN/CLOSE button on the front panel.
	Result: The compartment opens.
3	Place one disc in the front slots of the carrousel, with the label on the
	discs facing upwards.

Check that the compact disc has been correctly inserted in the holder before closing the compartment.

4 If you wish to load another compact disc, press the DISC CHANGE button on the front panel (or DISC SKIP on the remote control). Result: The carrousel rotates by 120°.

5 Close the compartment by pressing the OPEN/CLOSE button again.

If you wish to start playing a disc directly, you can also proceed as follows.

To play...	Press...
Disc 1	MP3-CD /CD (	) or Disc 1

Disc 2	Disc 2
Disc 3	Disc 3

Result: The compartment closes automatically and the disc selected starts playing.

6 To change or unload the compact disc changer, repeat Steps 2 to 5.

Keep the compartment closed whenever you are not using it, to prevent dust from entering.

You can load or unload compact discs when the radio, usb or auxiliary source function is selected, and when you press the OPEN/CLOSE button, all of the other functions will be changed to CD/MP3-CD function.

2,5

ENG

This is a player that enables the playback of audio CD, CD-R, CD-RW and MP3/WMA-CD and does not possess the function that saves MP3 files.

Do not use CDs of irregular shapes like heart or octagon shapes. The performance of the player may be degraded.

At least more than one CD should be inserted for playbacks.

1	Press the STANDBY/ON button to switch on the power.
2	Press the CD/MP3-CD(	) of the main unit to select the CD function.
3	Insert more than one CD, or a MP3/WMA-CD .
4	Press the CD/MP3-CD(	) button of the main unit or the	button


	of the remote control.

If there are more than one CD or an MP3/WMA-CD insert- ed, replays are then processed in order.

Your CD Player will take a few moments to scan through all the tracks recorded on a particular MP3/WMA-CD. The English name of the song may be indicated on the display only if directly downloaded from the PC or if the purchased MP3/WMA-CD is sorted according to titles(directory). (Other languages besides English may not be indicated.)

The English name of the track may not be indicated depending on the characteristics of the MP3/WMA-CD.

	<CD Playback>		<During the MP3/WMA-CD playback>
			Track	Indicator


	Track Indicator
		Playtime Indicator		Playtime Indicator
		Playtime Indicator
5	Adjust the volume according to needs with the following procedures.
	Press the VOLUME + or – button of the remote control.

The volume level can be adjust in 31 steps(VOL MIN,VOL 1- VOL 29,and VOL MAX).

6 If it is desired to pause while the playback is processing, press the

CD/MP3-CD( ) button.

Press the CD/MP3-CD( ) button once again to playback again.

7 To stop playback, press the

button.

A new disc may be inserted in the remaining two compartments excluding the CD which is being played back. Press the Disc Changer button to open the CD tray. The revolving part does not turn during playbacks.

If there is not even one CD inserted in the CD tray, it is indicated as “NO DISC”.

If the CD Repeat function is not selected, 3 CDs are played back which automatically stops.

The quality of MP3/WMA-CD playback may vary depending on the condition of the disc containing the music files or the condi- tion of the recorder with which the disc was created.