LEVELLING THE REFRIGERATOR
Now that the doors are back on the refrigerator, you will want to make sure the refrigerator is level so you can then make fi nal adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even.
The front of the refrigerator is also adjustable.
When the Freezer door is lower than the fridge
Insert a fl
Leg
Screw Driver
When the Freezer door is higher than the fridge
Insert a fl
MAKING MINOR ADJUSTMENTS TO THE DOORS
Remember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on levelling the refrigerator.
When the door of the freezer is higher than the fridge
Adjustment part
In the process for adjusting both the doors is the same. Open the doors and adjust them, one at a time, as follows:
1. Unscrew the |
|
| |
nut 1 from the | 3 | Wrench | |
lower hinge until |
| 2 Bolt | |
it reaches the |
| ||
1 | Nut | ||
upper end of the | |||
|
| ||
bolt 2 . |
|
| |
When you release the nut | 1 , make sure that |
you use the Allen wrench provided 3 to loosen the bolt 2 in a
01 SETTING UP
Leg
Screw Driver
2. Adjust the |
|
height difference |
|
between the |
|
doors by turning |
|
the bolt 2 |
|
clockwise |
|
or counter clockwise | . |
When you turn clockwise move up.
3Wrench
2Bolt
,the door will
Refer to the next section for the best way to make very minor adjustments to the doors.
3. After adjusting |
|
| |
the doors, turn | 3 | Wrench | |
the nut 1 | |||
| 2 Bolt | ||
clockwise |
| ||
1 |
| ||
until it reaches | Nut | ||
the lower end |
|
| |
of the bolt, then |
|
| |
tighten the bolt again with the wrench | 3 | to fi x | |
the nut in place 1 . |
|
|
If you do not secure the nut fi rmly, the bolt may release.
English - 19
2013. 12. 26. 7:18 |