3.Next, remove the fi xed cap by turning it counter clockwise.
4.Remove the new fi lter’s protective cap and remove the old fi lter.
5.Position and insert the new fi lter into the fi lter housing. Slowly turn the water fi lter clockwise 90º to align with the indication mark on the cover, locking the fi lter in position. Make sure that the indicator is lined up with the “lock” position. Do not over tighten.
7.Lastly, Dispense 1 L of water through water dispenser and throw away. Make sure that water fl ows clearly again before drinking.
02 OPERATING
|
| Cover fi lter | |
1 |
|
| |
| 2 |
| |
| 4 |
| |
Sticker |
|
| |
(month | 3 | Align the | |
indicator) | |||
| |||
|
| indication | |
| 5 | mark with | |
|
| lock position |
For Exterior model
1.Shut off water supply.
2.Note the Flow direction on the fi lter.
3.Insert water supply tube into the inlet side of the fi lter until the tube stop.
| FLOW DIRECTION |
WATER SUPPLY | PERMEAT |
INLET SIDE |
|
Note : You must also ensure that the cut is square and not at any sort of angle as this could cause a leak
A newly installed water fi lter cartridge may cause water to briefl y spurt from the water dispenser. This is due to air getting into the line. It should pose no problem to operation.
Ordering replacement filters
To order more water fi lter cartridges, contact your authorized Samsung dealer.
-Internal Filter - HAFIN2/EXP
-External Filter - HAFEX/EXP
4.After inserting tube, put together the clip strongly. The Clip fi x the tube.
5.Turn on the water and check for leaks. If leaks occur, repeat step 1,2,3,4. If leaks persist, discontinue use and call your supporting dealer.
6.Once you have completed this process, hold the Ice Type button for 3 seconds to reset the fi lter schedule.
English - 33
2013. 12. 26. 7:18 |