Manuals / Brands / Personal Care / Wheelchair / Invacare / Personal Care / Wheelchair

Invacare Top End Terminator Jr ARMREST PAD ADJUSTMENT/ REPLACEMENT (FIGURE 5), REPLACING/REPOSITIONING THE CANTILEVER ARM LOCKING MECHANISM (FIGURE 4)

1 44

Download 44 pages, 701.88 Kb

19

Actuator

Cantilever Arm

Spring

FIGURE 4 - REPOSITIONING/REPLACING THE

LOCKING MECHANISM IN THE

CANTILEVER ARM

Angled Portion of

Locking Mechanism

Locking

Mechanism

ARMREST PAD ADJUSTMENT/REPLACEMENT (FIGURE 5)

Armrest Pad Adjustment

1. Remove the phillips screw from the rear of the

armrest pad.

2. Reposition the cantilever slide tube to one (1) of

five (5) positions.

3. Align the mounting hole in the cantilever slide tube

with the desired mounting hole from STEP 2.

4. Install the phillips screw UP through the desired

mounting hole in the armrest tube and the cantile-

ver slide tube mounting hole to secure the arm-

rest pad to the armrest tube.

5. Repeat STEPS 1-4 for opposite armrest pad if

necessary.

Armrest Pad Replacement

1. Remove the phillips screw from the rear of the

armrest pad.

2. Remove the phillips screw from the front of the

armrest pad.

3. Remove the EXISTING armrest pad from the arm-

rest tube.

4. Position the NEW armrest pad onto the armrest

tube and cantilever slide tube.

5. Secure the NEW armrest pad to the armrest tube

and cantilever slide tube with the two (2) phillips

screws.

REAR Phillips Screw

Cantilever Slide Tube

FRONT Phillips Screw

FIGURE 5 - ARMREST PAD ADJUSTMENT/

REPLACEMENT

Armrest

Tube

PROCEDURE 5ARMS

A

R

M

S

REPLACING/REPOSITIONING THECANTILEVER ARM LOCKINGMECHANISM (FIGURE 4)

CAUTION

The locking mechanism is spring loaded. Place

your free hand over the end of the cantilever

arm to prevent the locking mechanism from

springing out of the arm.

1. Flip the cantilever arm up and out of the way.

2. Unscrew the actuator from the locking mechanism.

3. Remove the locking mechanism and spring from

the cantilever arm.

NOTE: Inspect the spring and replace if necessary.

4. Slide the NEW spring and locking mechanism into

the cantilever arm.

5. Position the angled portion of the locking mecha-

nism in one (1) of two (2) ways:

A. ANGLED PORTION FACING UP - Arm will

flip UP.

B. ANGLED PORTION FACING DOWN - Arm

will flip DOWN.

6. Push and hold the locking mechanism into the

cantilever arm.

7. Screw the actuator into the locking mechanism

mounting hole.

8. Flip the cantilever arm up/down to lock in place.

9. Pull down/up on the cantilever arm to ensure it

has locked in place.

Contents

Main SPECIAL NOTES TABLE OF CONTENTS TABLE OF CONTENTS 4 TERMINATOR JR. SPECIFICATIONS P C F C STABILITY WARNING NOTE: When changes to the left hand column occur, follow across the chart and refer to the procedure to maintain the proper stability, safety and handling of the racing chair. GENERAL GUIDELINES SAFETY/HANDLING OF WHEELCHAIRS F T Y U M M R Y GENERAL GUIDELINES PROCEDURE 1 Center of Gravity Coping with Everyday Obstacles A Note to Wheelchair Assistants Stability and Balance Reaching, Leaning - Backwards GENERAL GUIDELINESPROCEDURE 1 Reaching, Leaning and Bending Forward Tilting Functional Reach From a Wheelchair Stairways Transferring to and From Other Seats GENERAL GUIDELINES PROCEDURE 1 ESCALATORS? SORRY! SAFETY INSPECTION CHECKLIST PROCEDURE 2 SAFETY INSPECTION This Procedure includes the following: Safety Inspection Checklist TROUBLESHOOTING MAINTENANCE PROCEDURE 4 BACK FOLDING/UNFOLDING THE BACK Folding the Back Unfolding the Back CHANGING THE BACK ANGLE (FIGURE 2) REPLACING STANDARD BACK UPHOLSTERY (FIGURE 4) ADJUSTING THE BACK HEIGHT (FIGURE 3) PROCEDURE 4BACK REPLACING CUSTOM MANUAL ADJUSTABLE TENSION BACK UPHOLSTERY (FIGURE 5) The Adjustable Tension Straps The Back Upholstery Cover Replacing Adjustable Tension Back Upholstery BACKPROCEDURE 4 REPLACING THE SPREADER BAR REPLACING THE LOCKING MECHANISM IN THE BACK CANE Page USING CANTILEVER ARMS INSTALLING/REMOVING CANTILEVER ARMS (FIGURE 1) Installing Removing ADJUSTING CANTILEVER ARM HEIGHT (FIGURE 1) ADJUSTING CANTILEVER ARM ANGLE (FIGURES 2 AND 3) Actuator Cantilever Arm Spring ARMREST PAD ADJUSTMENT/ REPLACEMENT (FIGURE 5) Armrest Pad Adjustment Armrest Pad Replacement REAR Phillips Screw Cantilever Slide Tube FRONT Phillips Screw Armrest Tube INSTALLING T-ARM SOCKETS INSTALLING/REMOVING T-ARMS Installing T-Arms Removing T-Arms ADJUSTING THE T-ARMS Adjusting T-Arm Depth (FIGURE 10) Adjusting T-Arm Width (FIGURE 9) Adjusting T-Arm Sockets (FIGURE 11) REPLACING THE T-ARM LOCKING LEVER (FIGURE 12) SEAT PROCEDURE 6 REPLACING SEAT PAN (FIGURE 1) ADJUSTING REAR SEAT HEIGHT ADJUSTING SEAT DEPTH (FIGURES 2 AND 3) 24 987654321 PROPER MOUNTING HOLES FOR BACK ANGLE BRACKET SHORT FRAME LONG FRAME FIGURE 3 - ADJUSTING SEAT DEPTH SEAT PROCEDURE 6 ADJUSTING SEAT WIDTH (FIGURE 4) NOTE: Retain the attachment hardware for installa- tion of the NEW seat pan. Hex Screws Coved Washers Crossmember Wheelchair Frame Front Mounting Hole SHORT FRAME SEAT-TO-FLOOR HEIGHTS LONG FRAME SEAT-TO-FLOOR HEIGHTS ADJUSTING QUICK-RELEASE AXLES (FIGURE 2) REMOVING/INSTALLING REAR WHEELS (FIGURE 1) INSTALLING QUAD-RELEASE AXLES (FIGURE 3) Removing Play From Rear Wheels ADJUSTING QUAD-RELEASE HANDLES (FIGURE 4) In and/or Out (FIGURE 5) OPENING/CLOSING CLAMPS Camber Clamps Receiver Tube Clamps NOTE: The receiver tube clamps are used ONLY to adjust wheelbase length. REPAIRING/REPLACING REAR WHEEL, TIRE/TUBE ADJUSTING REAR WHEEL CAMBER Adjusting Toe In/Toe Out (FIGURE 10) DETERMINING/ADJUSTING TOE IN/TOE OUT Determining Toe In/Toe Out (FIGURES 8 AND 9) ADJUSTING WHEELBASE LENGTH (FIGURE 11) REPLACING AXLE TUBE (FIGURE 13) ADJUSTING WHEELBASE WIDTH (FIGURE 12) REPOSITIONING THE AXLE TUBE (FIGURES 14 AND 15) WHEELS PROCEDURE 7 AXLE TUBE POSITIONS REPOSITIONING/REPLACING FRONT CASTERS (FIGURE 14) Replacing Front Casters Repositioning Front Casters ADJUSTING FRONT CASTER HEIGHT (FIGURE 15) WHEEL LOCK ADJUSTMENT/ REPLACEMENT (FIGURE 16) ADJUSTING/REPLACING FLIP-UP FOOTBOARD (FIGURE 1) ANTI-TIPPER REPLACEMENT/ ADJUSTMENT (FIGURE 3) ADJUSTING/REPLACING RIGID TUBULAR FOOTREST (FIGURE 2) ELASTOMERS AND SUSPENSION REPLACING FRONT ELASTOMERS Page Page LIMITED WARRANTY