PROCEDURE 7

WHEELS

4. Measure the distance between the center lines at the

NOTE: Marks on the telescoping tubes have been pro-

rear and front of the rear wheels at approximately 12-

vided to ensure the telescoping tubes are aligned with

inches from the ground/floor. Refer to DETERMIN-

each other. The performance of the wheelchair will be

ING TOE IN/TOE OUT inthisprocedureofthemanual.

affected if the two (2) telescoping tubes are not adjusted

5. Repeat STEPS 1-4 until the toe in/toe out measurement

to the same position. Refer to FIGURE 11.

islessthan1/2-inch(0+1/4-inchformaximumrollability).

 

W

H

E

E

L

S

Axle Tube -

Rotates Up and

Down

NOTE: Rear wheels removed from the drawings for clar- ity, There is no need to remove rear wheels from the wheelchair during adjustment.

FIGURE 10 - ADJUSTING TOE IN/TOE OUT

ADJUSTING WHEELBASE LENGTH (FIGURE 11)

WARNING

Always perform this procedure in the presence of an assistant. The position of the footrest, cam- ber tube, back angle, the tautness of the back upholstery as well as the user's condition are di- rectly related to the wheelchairs stability. Any change to one (1) or any combination of the five (5) may cause the wheelchair to decrease in stability. Use EXTREME caution when using a NEW seating position.

1.Open both receiver tube clamps. Refer to OPENING/ CLOSING CLAMPS in this procedure of the manual.

WARNING

Telescoping tubes have two types of marks - "0" and "X" (DETAIL "A"). "X" marks are provided to indicate that the telescoping tube has been extended too far. DO NOT adjust the telescop- ing tubes so any "X" marks are showing. Other- wise, injury or damage may occur.

2.Perform one (1) of the following:

A.PULL telescoping tubes out of receiver tubes to LENGTHEN THE WHEELBASE, increase stability and maintain standard maneuverabil- ity of the wheelchair.

B.PUSH telescoping tubes into receiver tubes to SHORTEN THE WHEELBASE, increase the maneuverability, distribute additional weight onto the rear wheels and decrease the stabil- ity of the wheelchair.

WARNING

QUICK RELEASE LEVERS - Make sure the quick re- leaseleversare pointing towards the inside of the wheelchair and is in the CLOSED position BEFORE using the wheelchair, otherwise personal injury or damage to the wheelchair may result.

STANDARD - Make sure the hex screws and lock- nuts are securely tightened BEFORE using the wheelchair, otherwise personal injury or damage to the wheelchair may result.

CAUTION

Do not close the quick-release levers or tighten the hex screws and locknuts without telescoping tubes int he receiver tubes. Damage to the re- ceiver tubes will occur.

3.Close both receiver tube clamps. Refer to OPEN- ING/CLOSING CLAMPS in this procedure of the manual.

4.Roll the wheelchair before using to make sure there is no excessive drag to either side.

NOTE: If drag to either side occurs, refer to DETERMIN- ING/ADJUSTING TOE IN/TOE OUT in this procedure of the manual.

"0" Marks

"X" Marks

DETAIL "A" -

TELESCOPING

TUBE MARKS

Clamp

Receiver Tube

FIGURE 11 - ADJUSTING WHEELBASE LENGTH

32

Page 31 Page 33
Page 32
Image 32
Invacare Top End Terminator Jr Adjusting Wheelbase Length Figure, ING TOE IN/TOE OUT inthisprocedureofthemanual
Page 31 Page 33

Top End Terminator Jr specifications

The Invacare Top End Terminator Jr is a premier wheelchair designed specifically for young athletes, providing both performance and versatility. It caters to the needs of competitive youth athletes, ensuring superior functionality and comfort during sports activities. The Terminator Jr blends advanced technology with thoughtful design, allowing young users to experience the thrill of competitive racing.

One of the standout features of the Terminator Jr is its lightweight aluminum frame. This construction not only enhances portability but also ensures that the wheelchair is robust enough to withstand the rigors of competitive sports. The frame is designed to provide optimal rigidity and stability, which translates into improved performance during races.

The Terminator Jr boasts an adjustable camber. This feature allows users to modify the angle of the wheels for increased speed and maneuverability. By altering the camber, athletes can optimize their performance based on personal preference and training requirements, making it an adaptable choice for different racing conditions and environments.

Another significant aspect of the Terminator Jr is its high-quality wheels and tires. The wheelchair is equipped with specialized racing wheels that offer excellent traction and control on various surfaces. The tires are designed for speed while ensuring stability, contributing to a superior racing experience.

The seat and backrests of the Terminator Jr are designed with comfort and support in mind. The seating system is adjustable, allowing for customization according to the athlete’s size and needs. This level of personalization helps to prevent discomfort during long periods of use, enabling young athletes to focus entirely on their performance.

Additionally, the Terminator Jr includes a variety of accessory options, such as footrests and backrest supports, which can be tailored to the athlete's preferences. This adaptability is key in ensuring that the wheelchair meets the specific requirements of different sports and individual users.

Safety and durability are paramount in the design of the Invacare Top End Terminator Jr. Its superior construction ensures that it can handle the physical demands of competitive racing, providing athletes with peace of mind as they focus on their performance.

In summary, the Invacare Top End Terminator Jr is a cutting-edge racing wheelchair that emphasizes performance, comfort, and customization. With its lightweight aluminum frame, adjustable camber, high-quality wheels, and customizable seating, it stands out as an excellent choice for young athletes committed to excelling in their chosen sports.
Top Page Image Contents