mAKING ICE
1.Fill the tray up to 80% with water level.
2.Place the ice tray in the top freezer drawer.
3.Wait until the ice cubes are formed.
4.Twist the ice tray slightly to take out the ice cubes.
Freezing time
It is recommended that you wait for about 1~2 hour with the temperature set to Power Freeze for the ice cubes to form.
| Danger of explosion |
caution | • The coldest parts of the refrigerator is |
| the rear panel. |
This is the best place to store delicate foodstuffs.
•Glass bottles containing liquids should never be stored in the freezer as the glass can shatter when the contents freeze.
USING THE WATER DISPENSER (OPTIONAL)
Filling the water
You can fill the water with the water tank sitting inside of the refrigerator or you can remove the water tank to fill the water.
Method 1
Fill the water through the hole on the top of the water tank.
If you pour the water too fast, water may overflow.
Getting water from the dispenser
Place a glass underneath the water outlet and push it gently against the water dispenser lever with your glass. Blue light will turn on when you push the lever.
•Make sure the glass is in line with the dispenser to
prevent the water from splashing out.
•Water dispenser may not be available depending on the model.
REMOVING THE INTERIOR PARTS
Shelves
Gently lift up the shelves with both hands and pull it toward you.
Door guards
Firmly grab the door guards with both hands and lift it up gently to remove the door guards.
Method 2
1.Release the lock on the both side of the water tank to remove the lid on the water tank.
2.Fill the water in the water tank.
Do not put anything other than water in caution the water tank.
12_ Operating
Water tank
Firmly grab the water tank with both hands and lift it up towards you gently to remove the water tanks.
Water tank may not be available depending on the model.