Operating your refrigerator
CHECKING THE CONTROL PANEL
(TYPE A) | (TYPE B) | (TYPE C) |
5
1
6
2
3
4 | 6 |
Each time you press the button, a short beep will sound.
1Fridge
Press the Fridge button to set the fridge to desired temperature from the range between 1°C and 7°C. Default set temperature is set on 3°C and each time you press the Fridge button, temperature will change in following order and temperature indicator will display the desired temperature.
(TYPE A, B)
(TYPE C)
Press and hold this button for 3 seconds to activate the Vacation function.(TYPE A)
2Freezer
Press the Freezer button to set the freezer to desired temperature from the range between
will display the desired temperature.
(TYPE A, B)
(TYPE C)
10_ Operating
Fridge or Freezer temp indicator will blink when temperature in the fridge or freezer
compartment goes up dramatically by storing warm food or frequent door opening.
(Fridge or Freezer temperature indicator will stop blinking when temperature in the fridge or freezer becomes normal. If temperature indicator does not stop blinking after several hours, please contact your service center.
Press this button for 3 seconds to activate the Power Freeze function. Power Freeze indicator
( ) will light up and the refrigerator will speed up the time to needed to freeze products in the freezer. This function will be activated for 72 hours and freezer indicator will display
If you need to freeze large amount of food stuff, activate Power Freeze function
24 hours before.
3Alarm
1. Door alarm
Press this button to activate the Door alarm function. Alarm indicator ( ) will light up and the refrigerator will alert you with alarm sound if the refrigerator door is kept open for longer than 2 minutes. To deactivate the this function, press the Alarm button again.
2.Temperature Alarm
(For RL60GQ**, RL58GQ** models)
Press this button to activate the Temperature alarm function. The alarm indicator ( ) will light up. If the freezer compartment is too warm because there has been a power failure, the signal of “-
the actual temperature is indicated. To deactivate the Temperature Alarm function, press the Alarm button again.
This warning may operate ;
•when the appliance is turned on
•the freezer compartment is too warm due to a power failure.