595mm |
at least
50mm
115
at least
50mm
584mm
1. Remove the Hinge Cover and detach the sensor from the right Hinge Cover.
1,202mm
UP PERATING012 OSETTING
960mm
•Height of the product may be different depending on the models.
•Allow clearance to the right, left, back and top when installing.
This will help reduce power consumption and keep your energy bills lower.
•Do not install the Refrigerator where the temperature will go below 50ºF (10ºC).
REVERSING tHE Door
Before you reverse the refrigerator door, make sure to unplug the refrigerator. If this operation is not performed by After sales service, it is not covered by the warranty.
1.Before attempting to reverse the refrigerator doors ensure that the refrigerator is disconnected from the main electricity supply and all food stuffs are emptied from inside the appliance.
2.If the customer does not feel confident to follow instruction in the user manual, a Samsung qualified service engineer must be contacted to carry out this change.
3.Do not plug in Refrigerator just after door reverse finished process and wait for at least one hour.
Required Tools
Not provided
Phillips Head | Flat Head | 10mm Socket | |
Driver (+) | Driver | Wrench (for bolts) | |
Not provided | Additional part | ||
11mm Wrench | 3/16” Allen | Top Left Hinge | |
Wrench (for | Case (Underneath | ||
(for hinge shaft) | |||
middle hinge) | the Cover Hinge) | ||
|
2.Remove bolts (①) and disconnect the wire (②).
①②
3.Remove the Wire Covers (①) and Door Cover (②).
②
①
4.Remove the Hinge and detach Hinge Case from the hinge. Pull the wires out from the Hinge Case.
5.Remove the fridge door from the Middle hinge by carefully lifting the door straight up.
The door is heavy, be careful not to CAUTION injure yourself when removing the door.