Operating Instructions & Parts Manual | 3E358B and 3E359B |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
Dayton® Portable
Oil-Fired Heaters
Description
Dayton Models 3E358B and 3E359B are 350,000 Btu/Hr heaters and 600,000 Btu/ Hr heaters, respectively. These heaters use only Kerosene or No. 1 fuel oil for combustion and electricity to run the motor. They are primarily intended for well ventilated indoor or outdoor temporary heating of buildings under construction, alteration, or repair (Read General Safety Information section carefully). They may be used in agricultural, industrial, and commercial environments. Products
of combustion are vented into the area being heated.
Unpacking
1.Remove all protective packing applied to heater for shipment.
2.Remove heater from shipping container.
3.Check heater for any shipping damage. If heater is damaged, promptly inform dealer where you bought heater.
Figure 1 – Model 3E358B | ® | Figure 2 – Model 3E359B |
ARL LOGO |
| G 004 |
General Specifications
| Model 3E358B | Model 3E359B |
Output Rating | 350,000 Btu/Hr | 600,000 Btu/Hr |
Amperage at 120V 60 Hz | 7.1 | 11.0 |
Fuel | Kerosene or No. 1 fuel | Kerosene or No. 1 fuel |
Fuel Tank Capacity | 30.0 U.S. Gallons | 36.0 U.S. Gallons |
Fuel Consumption | 2.5 U.S. Gallons/Hr | 4.0 U.S. Gallons/Hr |
Motor | 1725 RPM | 1725 RPM |
Hot Air Output (CFM) | 1,350 | 3,300 |
Fuel Pump Pressure | 100 psi | 110 psi |
Heater Weight with Fuel | 390 Lb | 550 Lb |
Heater Weight without Fuel | 180 Lb | 285 Lb |
Spark Plug Gap | .075 inches | .075 inches |
Form 5S2514
Printed in U.S.A. | ® |
|
03430
0602/094/VCPVP
Version B - For Reduction | G016.J |