Connecting to GAS Supply

OWNER’S MANUAL

INSTALLATION

(Continued)

10.Feed thermostat wires from attic to furnace through 1/2" hole in ceiling wall plate.

11.Connect thermostat wires from attic to thermostat wires on furnace. Connect red wires together, then connect white wires together. Use wire nuts to make connections. IMPORTANT: Make sure thermostat wires do not touch combus- tion chamber.

Mounting the Thermostat to Wall

1.	Connect thermostat wires to the two
	terminal screws on back of thermostat
	(see Figure 6). Connect red wire to “R”
	terminal. Connect white wire to “W”
	terminal.
2.	Push any excess wire back through hole
	in wall and plug hole with insulation
	to prevent drafts. Drafts affect the ther-
	mostat operation.
3.	Use thermostat base to mark mounting
	screw locations.

Wall

Anchors

	.4
OFF	.5
	.7
	1.0

	50	60
		60	70
SOLID				80	90
					90
		STATE
		STATE
50	60				IGNITION
	60	70
		70		80
				80		90
						90

Figure 7 - Mounting Thermostat to Wall

WARNING: A qualified ser- vice person must connect fur- nace to gas supply. Follow all local codes.

WARNING: Unplug furnace before connecting to gas supply.

All piping must comply with local codes and ordinances or with the National Fuel Gas Code (ANS Z223.1 NFPA No. 54), whichever applies.

You can connect furnace to gas supply at front of furnace (inside) or at rear of furnace (outside).

Connecting Furnace to Gas Supply at Front of Furnace

1.Locate gas inlet pipe on lower, right front of furnace (see Figure 8).

2.Connect 3/8" NPT pipe or nipple to gas inlet pipe (see Figure 8). See Provid- ing Gas Piping to Furnace, pages 9 and 10, for correct gas pipe installation.

4.	Drill proper-sized holes for wall anchors.
5.	Attach thermostat to wall using screws
	provided (see Figure 7).

CAUTION: Use only new, black iron or steel pipe. Copper tubing may be acceptable in cer- tain areas. Check local codes.

3/8" NPT Pipe or Nipple

Gas Inlet Pipe

White Wire

Red Wire

Use pipe large enough in diam- eter to allow proper gas volume to furnace. If pipe is too small, undue loss of pressure will oc- cur. Refer to chart on page 9.

CAUTION: Lightly apply pipe joint sealant to male threads be- fore connecting. Use pipe joint sealant that is resistant to liquid petroleum (LP) gas.

Figure 8 - Connecting Gas from Inside of Room

Figure 6 - Connecting Thermostat Wires to Thermostat

Continued

201839

DNV40PB, DNV25PB specifications

Desa DNV25PB and DNV40PB are two advanced models in the range of DNV portable heaters renowned for their efficiency and innovative technology. These heaters are designed to provide reliable and effective heating solutions for various applications, from industrial settings to outdoor events.

One of the standout features of the DNV25PB and DNV40PB models is their robust construction, making them suitable for rigorous work environments. Both models are built with high-quality materials that ensure durability and resilience even in challenging conditions. This makes them an ideal choice for industries such as construction, warehouses, and agriculture, where reliable heating is essential.

The performance of the DNV heaters is enhanced by their powerful heating capacity. The DNV25PB model can deliver an impressive output of 25 kW, while the DNV40PB model boasts a strong 40 kW output. This substantial heating capability allows them to heat large spaces quickly and efficiently, providing comfort in less time and reducing energy costs. Additionally, both models come equipped with adjustable heating settings, allowing users to tailor the output to meet their specific needs.

These heaters incorporate advanced technologies that prioritize energy efficiency and safety. They are designed with smart control systems that monitor and adjust the heater's operation, optimizing fuel consumption while delivering consistent heat. Furthermore, safety features such as automatic shut-off mechanisms and overheating protection devices are integrated into both models, ensuring safe operation even in extended use.

Portability is another significant characteristic of the DNV25PB and DNV40PB models. Their compact design, coupled with built-in handles and wheels, allows for easy transport between different sites, making them highly versatile. Users can effortlessly relocate the heaters to adapt to changing conditions or requirements, enhancing their practicality.

In summary, the Desa DNV25PB and DNV40PB portable heaters are characterized by their powerful heating capabilities, robust construction, energy efficiency, and safety features. They are well-suited for various industrial and outdoor applications, offering flexibility and reliable performance. With their innovative technology and thoughtful design, these models stand out in the market, providing effective heating solutions to meet diverse needs. Whether for temporary heating at a construction site or providing warmth for outdoor gatherings, the DNV series offers dependable performance tailored to user requirements.