Desa CGS2718P installation manual Operating Heater, For Your Safety Read Before Lighting

Page 20

20

OPERATING HEATER

FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING

WARNING ICON

G 001

 

 

If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electric switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, don’t try to repair it, call a qualified service technician or gas supplier. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

LIGHTING INSTRUCTIONS

WARNING

WARNING ICON

G 001

•If fireplace has glass doors, never operate this heater with glass doors closed. If you operate heater with doors closed, heat buildup inside fireplace will cause glass to burst. Also if fireplace opening has vents at the bottom, you must open the vents before operating heater.

•You must operate this heater with a fireplace screen in place. Make sure fireplace screen is closed before running heater.

NOTICE

During initial operation of new heater, burning logs will give off a paper- burning smell. Orange flame will also be present. Open damper or window to vent smell. This will only last a few hours.

Note: Homeowners generally prefer to operate their heater with the chimney damper closed. This will put all the heat into the room. However there may be times you will desire the full flames of the Hi heat setting but will find the heat output excessive. You can open the chimney damper (if you have one) fully or partially to release some of the heat. WARNING: Damper handle will be hot if heater has been running.

1.STOP! Read the safety information above.

2.Make sure manual shutoff valve is fully open.

3. Press in and turn control knob clockwise

Clockwise to the OFF position.

Ignitor Button

 

Control Knob

 

HI

PILOT

 

 

 

 

OFF

 

LO

 

Figure 20 - Control Knob and Ignitor Button Location

4.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow “B” in the safety information above. If you don’t smell gas, go to the next step.

102989

Page 19 Page 21
Image 20
Page 19 Page 21
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASContents Safety Information 001 Local Codes Unpacking Product Features Safety PilotOperation Piezo Ignition SystemAIR for Combustion and Ventilation Providing Adequate VentilationUnusually Tight Construction Confined Space and Unconfined SpaceDetermining AIR Flow for Heater Location Determining if You Have a Confined or Unconfined SpaceVentilation Air From Outdoors Ventilation AIRVentilation Air From Inside Building High traffic areas Windy or drafty areas InstallingCheck GAS Type Minimum Wall and Ceiling Clearances see Figure Minimum Fireplace ClearanceLOG Sizing Requirements Minimum Non Combustible Material Clearances If Using Mantel Floor Clearances Installing Damper Clamp Accessory for Vented Operation Attaching Damper ClampInstalling Heater Base Assembly Installation Items NeededConnecting to GAS Supply Attaching Base Assembly to Fireplace FloorExternal Regulator With Vent Pointing Down Pressure Testing gas Supply Piping system Checking GAS ConnectionsTest Pressures Equal To or Less Than 1/2 Psig Installing Logs Add lava rock around base of heaterFor Your Safety Read Before Lighting Operating HeaterVariable Control Operation Inspecting Burners Pilot Flame PatternCleaning and Maintenance Trouble Shooting Turn off heater and let cool before cleaningODS/PILOT and Burner LogsCleaning and Mainte TROUBLE- ShootingRefer to Air for Com Trouble Shooting Statement at topModel Technical ServiceService Hints Parts Central Parts Under WarrantyParts Not Under Warranty Accessories Valve GA5010Hood GA6050 Hood GA6052Illustrated Parts Breakdown Parts List CGS2718P CGS3124PWarranty Information Keep this Warranty

CGS2718P specifications

The Desa CGS2718P is a modern gas log set that combines state-of-the-art technology with aesthetically pleasing design, making it an ideal choice for homeowners seeking both functionality and beauty in their heating solutions. This model stands out for its efficiency and ease of use, providing effective heating while also offering a stylish centerpiece for any living space.

One of the main features of the Desa CGS2718P is its realistic flames and logs, designed to mimic the look of real wood-burning fireplaces. This is achieved through advanced ceramic fiber logs and a unique flame presentation that exudes warmth and authenticity, creating a cozy ambiance in any room. The logs are intricately designed to replicate the natural features found in real wood, providing a visually stunning experience.

The CGS2718P operates on natural gas, offering convenience and reliability compared to traditional wood-burning alternatives. This means less mess, lower maintenance, and the ability to control the heat output with greater precision. The unit is equipped with an easy-to-use manual control that allows homeowners to adjust their heating settings effortlessly.

In terms of technology, the Desa CGS2718P boasts an efficient heating system that maximizes warmth while minimizing energy consumption. The unit is designed with an innovative vent-free system, which means that no external venting is necessary. This makes it an excellent option for spaces where traditional chimneys would be impractical. Additionally, the vent-free design allows for higher heat retention, making the unit more efficient and eco-friendly compared to other systems.

Another notable characteristic of the CGS2718P is its safety features. It includes a built-in oxygen depletion sensor that automatically shuts off the gas supply if carbon dioxide levels become unsafe. This is vital for ensuring the safety of occupants in any home. Furthermore, the unit is designed for simple installation, making it accessible for both professionals and DIY enthusiasts alike.

In summary, the Desa CGS2718P is an impressive gas log set that offers a perfect blend of aesthetics, technology, and safety. With its realistic flame presentation, efficient heating capability, and modern safety features, it presents a compelling option for anyone looking to enhance their home heating experience. Whether for cozy evenings or as a decorative feature in your living space, the CGS2718P is sure to deliver warmth and beauty for years to come.
Top Page Image Contents