Setting a Boot Password
When setting a password, you have to enter a password to use the computer or enter the BIOS Setup.
By configuring a password, you can restrict system access to authorized users only and protect data and files saved on the computer.
Before You Start!
Do not lose or forget your password.
If you have forgotten your password, contact a Samsung service center. In this case, a service fee will be charged.
English
Setting a Supervisor Password
A Supervisor Password is required to turn the computer on or to start the System Setup.
When setting a Supervisor Password, users other than a supervisor cannot use the computer.
1 | Setup.Select the Security menu in the BIOS |
2 | In the Set Supervisor Password item, |
| press <Enter>. |
3 | Enter a password, press <Enter>, re- |
enter the password for confirmation, | |
| and press <Enter> again. The |
| password can be up to 8 alphanumeric |
| characters. Special characters are not |
| allowed. |
4 | The supervisor password has been set. |
The supervisor password is required to |
turn the computer on or to enter the BIOS Setup.
For some models, if the password entered message appears in the Setup Notice window, the settings are not complete until the Enter key is pressed.
Setting a User Password
Users can start the system with a user password, but cannot enter the System Setup. By doing this, you can prevent other users from entering Setup.