Samsung LP08IPLEBTZEN, LP10IPLSBTZEN, LP08IPLSBTZEN manual Previews are too slow

The picture size changes when I rotate it.

The picture size changes automatically depending on the rotation angle (90°, -90°) in order to display the entire image on the screen.

The picture looks stretched horizontally or vertically.

Press [MENU] on the Slideshow screen. Go to <Settings>-<Photos>- <Aspect Ratio> and change the setting to <Original Fit> and check again.

Slideshow Transition is displayed when I have saved only one picture I want in the memory card or when I pause the Slideshow with multiple pictures saved in the memory card.

The Slideshow Transition will be displayed automatically in order to protect the panel. This is not an error.

In what order are the pictures, which are saved in the memory card, displayed?

They are arranged according to the file names. The slide show display order is determined in the order of number, upper-case letter, and lower-case letter.

Please note that a file name of up to only 25 characters can be recognized.

The Slideshow doesn’t start automatically.

Ensure that the <Startup Mode> is set to <Slideshow> in <Settings>-<General>.

I have set <Auto Picture On/Off> but the screen doesn’t switch on automatically.

··Ensure that the current time has been set correctly.

··The screen will not switch on automatically if you have turned the digital frame off by pressing [ ] when <Auto Picture On/Off> has been set. The screen switches on automatically only if the power has been switched off automatically at the Auto Picture Off time.

The pictures I copied from a USB memory or SD card onto the internal memory have changed in resolution and file size.

This product is designed to reduce the file size of high-resolution pictures to fit the screen’s ideal resolution when they are copied onto the internal memory.

If you want to disable the settings, you can change to the original size by selecting <Settings>-<General>-<Frame Memory Copy>.

The digital frame is not recognized as a removable disk when I connect it to a PC with the USB cable.

The SPF-87H has 2 USB connectors. You must connect the USB connector [] because the digital frame will not be recognized as a removable disk if only the auxiliary power (DC 5V) connector is connected to a PC.