Operation Storage Preventative Maintenance Schedule

OPERATION

Continued

1. Unplug power cord from outlet.

1.Wait 2 minutes after stopping heater.

2.Repeat steps under To Start Heater, page 7.

1.Drain fuel tank. Locate drain plug on underside of fuel tank. Remove drain plug to drain all fuel. Be sure all fuel is removed.

2.Replace drain plug.

3.Add one gallon (4 liters) of clean kerosene to fuel tank.

4.Attach fuel cap.

5.Move heater forwards and backwards to stir fuel.

6.Remove drain plug and drain fuel tank. Be sure all fuel is removed.

7.Replace drain plug. Properly dispose of old and dirty fuel.

8.Store heater in dry place. Make sure storage place is free of dust and corrosive fumes.

IMPORTANT: Do not store kerosene over summer months for use during next heating season. Using old fuel could damage heater.

!WARNING

Never service heater while it is plugged in, operating, or hot. Severe burns and electrical shock can occur.

Item	How Often	How To
Fuel tank	Flush every 150-200 hours	See Storage above.
	of operation or as needed.
Air output and	Replace every 500 hours of	See Air Output, Air Intake,
lint ﬁ lters	operation or once a year.	and Lint Filters, page 11.
Air intake	Wash and dry with soap and	See Air Output, Air Intake,
ﬁ lter	water every 500 hours of	and Lint Filters, page 11.
	operation or replace as needed.
Fuel ﬁ lter	Clean twice a heating season	See Fuel Filter, page 12.
	or replace as needed.
Spark plug	Clean and regap every 600	See Spark Plug, page 12.
	hours operation or replace
	as needed.
Fan blades	Clean each season or as needed.	See Fan, page 10.
Motor	Not required/permanently lubricated