If GAS Leak Occurs

SPECIFICATIONS

!WARNING

If you detect a gas leak, turn off propane supply at once. Ventilate the area. Wait until five minutes after propane odor is not present. Follow steps below to check for gas leak.

!WARNING

Never use an open flame to check for a leak. Apply a mixture of liquid soap and water to all joints. Bubbles forming show a leak. Correct all leaks at once.

1.After turning off propane supply and ventilating area, unplug heater power cord.

2.Turn propane supply on.

3.Apply a mixture of liquid soap and water to hose and connections between propane tank(s) and heater inlet. Bubbles forming show a leak.

4.Turn propane supply off and ventilate the area. Repair leak.

5.Wait until five minutes after propane odor is not present before restarting heater.

6.If you cannot repair leak, contact you local service center.

Model	BLP35ES
Electrical Input	220/240 volt, 50 hertz, 55 watts IP20
Maximum Input, net	10.3 KW at 27 millibar
Regulator Output	27 millibar
Burner Rate	10.3 KW, 796 g/hr
Supply Pressure (min.)	2 bar
Ventilation	260 cm2
Room Size	103 cubic meters
Air Delivery Class	Type A
Temperature Range for Heater Operation	-29° C to 29° C*

*When running heater in temperatures above 29° C, high internal temperatures may cause thermal limit device to shut down heater.