INSTALLING | 6. Insert top edge of glass panel into the upper glass retaining channel (see Figure 11). |
| |
HEATER |
|
Continued | Hearth |
| Assembly |
| Glass |
| Panel |
Lower Front
Access Area
Figure 10 - Inserting Glass Panels
CAUTION
Make sure you insert top edge of glass panels into the upper glass retaining channel. Do not install glass panels with top edge of glass in front of the upper glass retaining channel. Glass panels will not automatically go into the channel. You must guide the glass panels into it. Incorrect installation will damage front of heater due to excess temperatures.
7.Lower glass into lower glass retaining channel (see Figure 12). Slide glass panel all the way to the left side.
Note: If you have chipped or cracked a glass panel during installation, do not use. Contact your Vanguard dealer for a replacement glass panel.
8.Repeat steps 4 through 7 for all glass panels.
9.Reinstall glass guard. Reinstall lower front access panel of heater.
Upper Glass | 1 |
| |
| Glass | ||
Retaining |
| ||
Glass | Panel | ||
Channel | |||
Panel |
| ||
|
| ||
Lower Glass |
| Lower Glass | |
Retaining |
| ||
| Retaining | ||
Channel | 2 | ||
Channel | |||
|
Lower Front
Access Area
Figure 11 - Inserting Top Edge of | Figure 12 - Inserting Glass into |
Glass Panel into Upper Glass | Lower Retaining Channel |
Retaining Channel |
|
15
100353