SERVICE PROCEDURES
Continued
Changing Burner Orifice
1.Shut off gas supply to heater.
2.Remove lower front access panel on heater.
3.Disconnect burner tube from orifice holder (see Figure 24).
4.Remove orifice holder from burner (see Figure 24).
5.Use socket or
6.Clean and replace orifice, or replace with new orifice.
7.Turn on gas to heater and check for gas leaks. Apply a mixture of liquid soap and water to all joints. Bubbles forming show a leak. Correct all leaks at once.
8.Replace lower front access panel.
Burner
Orifice
Burner
Tube
Orifice
Holder
Figure 24 - Orifice Location (35,000 BTU/Hr Burner Shown)
Figure 25 - Orifice
32
100353