Desa FVFM27PR installation manual Connecting to GAS Supply, Installation Items Needed

Page 12

INSTALLATION

Continued

IMPORTANT: Make sure the heater burner is level. If heater is not level, heater will not work properly.

Installation Items Needed

• hardware package (provided with heater)

• approved flexible gas hose (not provided) (if allowed by local codes)

• sealant (resistant to propane/LP gas, not provided)

• electric drill with 3/16" drill bit (metal or ma- sonry as applicable)

• flathead screwdriver

1.Apply pipe joint sealant lightly to male threads of the fitting to be threaded into gas control. Connect approved flexible gas hose to gas control fitting in heater (see Figure 11). IMPORTANT: Hold gas fitting with wrench when connecting flexible gas hose.

2.Locate two masonry screws in hardware package.

3.Place heater base in fireplace.

4.Place logs in their proper position on heater base. See Installing Logs, page 15.

5.Center heater base and logs front-to-back and side-to-side in fireplace.

6.Carefully remove logs without moving heater base.

7.Mark screw locations through one hole on each side of the mounting bracket (see Figure 12).

If installing in a brick-bottom fireplace, mark screw locations in mortar joint of bricks.

8.Remove heater base from fireplace. If install- ing optional control accessories, do so at this time. Follow all directions provided with accessory.

9.Drill holes at marked locations using 3/16" drill bit.

10.Attach base assembly to fireplace floor using two masonry screws (in hardware package).

 

Flexible Gas

 

Hose (if allowed

Fitting

by local codes)

Figure 11 - Attaching Flexible Gas Hose

to Heater

Masonry

Screw

Mounting

Flanges

Figure 12 - Attaching Base Assembly to

Fireplace Floor

CONNECTING TO GAS SUPPLY

WARNING:Aqualified service personmustconnectheatertogas supply. Follow all local codes.

WARNING: Never connect propane/LPheater directly to the propane/LP supply. This heater requires an external regulator (not supplied). Install the exter- nal regulator between the heater and propane/LP supply.

WARNING: Never connect naturalgasheatertoprivate(non- utility) gas wells. This gas is com- monly known as wellhead gas.

Installation Items Needed

Before installing heater, make sure you have the items listed below.

•external regulator (for propane/LP units only, supplied by installer)

•piping (check local codes)

•sealant (resistant to propane/LP gas)

•equipment shutoff valve *

•test gauge connection *

•sediment trap

•tee joint

•pipe wrench

*A CSA design-certified equipment shutoff valve with 1/8" NPT tap is an acceptable alternative to test gauge connection. Purchase the optional CSA design-certified equipment shutoff valve from your dealer. See Accessories, page 25.

12

www.desatech.com

108382-01G

Page 11 Page 13
Image 12
Page 11 Page 13
Contents FLAME-MAX VYM27NR, VYM27PR, FVFM27NR and FVFM27PRAlso Design-Certified As a Vented Decorative Appliance Table of Contents Safety Information Safety Information Product IdentificationProduct Features Remote Control AccessoriesLocal Codes UnpackingAIR for Combustion Ventilation Providing Adequate VentilationDetermining FRESH-AIR Flow for Heater Location Ventilation AIR Ventilation Air From Inside BuildingVentilation Air From Outdoors Installation Installation and ClearancesCheck GAS Type Vent-Free Operation OnlyInstallation If Using Mantel Mantel ClearancesFloor Clearances Installing Damper Clamp Accessory for Vented Operation Installing Heater Base AssemblyMasonry Fireplace Connecting to GAS Supply Installation Items NeededNatural Gas From Gas Meter Propane/LP GasPressure Testing Gas Supply Piping System Checking GAS ConnectionsTest Pressures In Excess Of 1/2 Psig KPa Test Pressures Equal To or Less Than Psig 3.5 kPaInstalling Logs Pressure Testing Heater Gas ConnectionsFor Your Safety Read Before Lighting Operating HeaterLighting Instructions  MANUAL Lighting Procedure Operating HeaterTo Turn OFF GAS To Appliance Shutting Off HeaterOptional Hand-Held Remote OperationOn/Off Series Model HRC100 Thermostat Series Model HRC200Inspecting Burners Pilot Flame PatternBurner Flame Pattern Cleaning Maintenance Cleaning Burner Injector Holder and Pilot Air Inlet HoleInspecting Burners Burner Primary AIR HolesCleaning Maintenance Troubleshooting Observed Problem Possible Cause RemedyTroubleshooting See Cleaning and MaintePower is low Ment at topReceiver and Hand Held Thermostat Remote Control Receiver and Hand Held Remote ControlWALL-MOUNT ON/OFF Switch WALL-MOUNT ThermostatIllustrated Parts Breakdown Models VYM27NR, VYM27PR, FVFM27NR and FVFM27PRParts List Warranty Information Keep this WarrantyLimited Warranty VENT-FREE GAS LOG Heaters

FVFM27PR specifications

Desa FVFM27PR is an innovative and highly adaptable fitness machine that has been designed to meet the diverse needs of users seeking an efficient and effective workout experience. This state-of-the-art equipment combines advanced technologies with practicality, making it a perfect addition to any home gym or fitness facility.

One of the standout features of the FVFM27PR is its versatile design, allowing users to perform a variety of exercises. It includes adjustable settings for resistance, accommodating users of all fitness levels, from beginners to experienced athletes. Its user-friendly interface ensures that anyone can easily navigate through different workout programs and adjust settings to fit their personal goals and preferences.

The FVFM27PR is equipped with cutting-edge fitness tracking technology. This feature helps users monitor their progress by tracking essential metrics such as heart rate, calories burned, and workout duration. With this data readily available, users can optimize their training regimens and make informed decisions about their fitness journeys.

Durability is another hallmark of the FVFM27PR. Constructed from high-quality materials, it promises longevity and stability during intense workout sessions. The machine is designed to withstand rigorous use, ensuring that it remains a reliable part of your fitness routine for years to come.

Additionally, the FVFM27PR offers a compact form factor, making it especially suitable for limited spaces. Its foldable design allows for easy storage when not in use, catering to those who desire a functional workout machine without sacrificing valuable living space.

The ergonomic design of the FVFM27PR enhances the user experience by providing optimal comfort and minimizing the risk of injury. It features adjustable seat and handle positions, allowing users to find their ideal fit for various exercises. This thoughtful design ensures that users can focus on their workouts without discomfort.

Moreover, the FVFM27PR integrates a variety of multimedia features, such as Bluetooth connectivity and compatibility with fitness apps. Users can easily connect their devices to access guided workouts, playlists, or motivation from personal trainers, further enriching the fitness experience.

In summary, the Desa FVFM27PR stands out with its versatility, advanced technology, durability, compact design, ergonomic features, and multimedia capabilities. These characteristics make it an excellent choice for anyone looking to enhance their fitness journey, whether at home or in a gym environment. With the FVFM27PR, achieving fitness goals has never been more accessible and engaging.
Top Page Image Contents