Desa REM200T owner manual Assembly, Fuels, Ventilation, Tools Needed

Page 4

200,000 BTU/HR

PORTABLE FORCED AIR HEATER

ASSEMBLY

This model is furnished with wheels and handles. Wheels, handles, and the mounting hardware are found in the shipping carton.

TOOLS NEEDED

Medium Phillips Screwdriver

3/8" Open or Adjustable Wrench

Hammer

1.Slide axle through wheel support frame. Install wheels on axle.

IMPORTANT: When installing wheels, point extended hub of wheels toward wheel support frame (see Figure 2).

2.Place cap nuts on axle ends. Gently tap with hammer to secure.

3.Place heater on wheel support frame. Make sure air inlet end (rear) of heater is over wheels. Line up holes on fuel tank flange with holes on wheel sup- port frame.

4.Place handles on top of fuel tank flange. Insert screws through handles, fuel tank flange, and wheel support frame. At- tach nut finger tight after each screw is inserted.

5.After all screws are inserted, tighten nuts firmly.

FUELS

WARNING: Use only kero- sene or No. 1 fuel oil to avoid risk of fire or explosion. Never use gasoline, naphtha, paint thinners, alcohol, or other highly flammable fuels.

Do not use heavy fuels such as No. 2 fuel oil or No. 2 Diesel. Using heavy fuels will result in:

clogged fuel filter and nozzle

carbon build up on spark plug

the need of nontoxic anti-icer in fuel dur- ing very cold weather

Front

Handle

IMPORTANT: Use a KEROSENE ONLY storage container. Be sure storage container is clean. Foreign matter such as rust, dirt, or water will cause the flame-out control to shut down heater. Foreign matter may also require you to clean fuel system often.

Screw

Hot Air

Outlet

Fuel

Tank

Flange

Wheel

Support

Frame

WheelNut

Cap Nut

Axle

Rear

Handle

Air

Inlet

Extended

Hub

VENTILATION

WARNING: Follow the mini- mum fresh, outside air ventila- tion requirements. If proper fresh, outside air ventilation is not pro- vided, carbon monoxide poison- ing can occur. Provide proper fresh, outside air ventilation be- fore running heater.

Provide at least a three-square-foot opening of fresh, outside air for each 100,000 Btu/Hr rating. Provide extra fresh air if more heat- ers are being used.

Example: A 200,000 Btu/Hr heater re- quires one of the following:

a two-car garage door (16 feet wide open- ing) raised five inches

a single-car garage door (9 feet wide opening) raised eight inches

two windows (30 inches wide opening) raised fifteen inches

Figure 2 - Wheel and Handle Assembly

4

106068

Image 4
Contents Portable Forced AIR Heater Safety Information FuelingProduct Identification UnpackingAssembly FuelsVentilation Tools NeededExtension Cord Wire Size Requirements Theory OperationTo Start Heater To Stop HeaterStoring TRANSPORTING, or Shipping Preventative MaintenanceSchedule Troubleshooting Service Procedures Upper Shell RemovalFAN AIR OUTPUT, AIR INTAKE, and Lint FiltersFuel Filter Pump Pressure AdjustmentFuel Valve Spark Plug NozzlePump Rotor Illustrated Parts Breakdown REM200TParts List Desired partSpecifications Maintenance KitsTechnical Service Wheels and Handle Parts ListWiring Diagram Accessories Replacement PartsRepair Service Warranty ServiceInternational

REM200T specifications

The Desa REM200T is a sophisticated and versatile heating solution designed to provide efficient warmth for various spaces. This model stands out due to its blend of modern technology, user-friendly features, and reliable performance, making it an excellent choice for homeowners and businesses alike.

One of the main features of the Desa REM200T is its exceptional heat output, which can effectively warm rooms of various sizes. With an output capacity of up to 200,000 BTUs, this unit can easily handle larger spaces, ensuring consistent comfort during cold weather. The REM200T is fueled by natural gas or propane, providing users with flexible options depending on their energy preferences and availability.

This heating solution incorporates advanced technologies such as electronic ignition, which ensures reliable start-up and minimizes the need for manual ignitions. The inclusion of a high-efficiency design helps maximize heat output while reducing energy consumption, ultimately lowering utility bills and lessening environmental impact.

Safety is a paramount concern in any heating appliance, and the Desa REM200T does not disappoint in this regard. It comes equipped with multiple safety features including an automatic shut-off system that activates in the event of an overheating situation, as well as a durable construction designed to withstand wear and tear. The unit also features a built-in thermostat, allowing users to maintain their desired temperature effortlessly.

Another notable characteristic of the Desa REM200T is its aesthetically pleasing design. The unit boasts a sleek exterior that can seamlessly fit into various decor styles, making it a practical yet stylish addition to any space. Its compact dimensions ensure that it can be easily installed in a variety of locations, including homes, garages, and workshops.

Ease of use is further enhanced by the user-friendly control panel, which provides straightforward operation and programming options. Whether setting the timer or adjusting the heat output, navigating the controls is simple and intuitive.

In summary, the Desa REM200T offers a powerful and efficient heating solution with a range of features designed for safety, convenience, and performance. Its adaptability to different fuel types, impressive heat output, and modern technologies make it an ideal choice for those seeking reliable warmth in any environment.