Desa REM200T owner manual Troubleshooting

Page 7

OWNER’S MANUAL

TROUBLESHOOTING

Note: For additional help, visit DESA International’s Technical Service web site at www.desatech.com.

WARNING: Never service heater while it is plugged in, operat- ing, or hot. Severe burns and electrical shock can occur.

OBSERVED FAULT

POSSIBLE CAUSE

REMEDY

Heater ignites, but flame-out control shuts

1.

Wrong pump pressure

1.

See Pump Pressure Adjustment, page 9

off heater after a short period of time

2.

Dirty air output, air intake and lint filters

2.

See Air Output, Air Intake and Lint Fil-

 

 

 

 

 

ters, page 8

 

3.

Dirty fuel filter

3.

See Fuel Filter, page 9

 

4.

Dirt in nozzle

4.

See Nozzle, page 10

 

5.

Dirty photocell lens

5.

Clean photocell lens

 

6.

Bad flame-out control

6.

Replace flame-out control

 

 

 

 

 

 

 

Heater will not ignite, but motor runs for a

1.

Wrong pump pressure

1.

See Pump Pressure Adjustment, page 9

short period of time

2.

Improper spark plug gap/position or

2.

See Spark Plug, page 10

 

 

carbon deposits across gap.

 

 

 

 

3.

Dirty fuel filter

3.

See Fuel Filter, page 9

 

4.

Dirt in nozzle

4.

See Nozzle, page 10

 

5.

Water in fuel tank

5.

Drain and flush fuel tank with clean

 

 

 

 

 

kerosene. See Storing, Transporting, or

 

 

 

 

 

Shipping, page 6

 

6.

Bad fuel valve

6.

See Fuel Valve, page 9

 

 

 

 

 

 

 

 

WARNING: High voltage!

 

 

 

 

 

 

 

 

 

7.

Electronic ignitor not grounded

7.

Make sure electronic ignitor mounting

 

 

 

 

 

is tight

 

8.

Bad electronic ignitor

8.

Replace electronic ignitor

 

 

 

 

 

Motor does not start when heater is plugged

1.

Flame-out control not reset

1.

Press flame-out control reset button

in, fan rotates slowly or does not turn

2.

Thermostat setting is too low

2.

Turn thermostat knob to a higher setting

 

3.

Solid state relay not allowed to reset

3.

Wait two minutes before trying to restart

 

 

 

 

 

heater

 

4.

Binding pump rotor

4.

If fan is hard to turn, see Pump Rotor,

 

 

 

 

 

page 11

www.desatech.com

106068

7

Image 7
Contents Portable Forced AIR Heater Fueling Safety InformationUnpacking Product IdentificationTools Needed AssemblyFuels VentilationTo Stop Heater Extension Cord Wire Size RequirementsTheory Operation To Start HeaterStoring TRANSPORTING, or Shipping Preventative MaintenanceSchedule Troubleshooting AIR OUTPUT, AIR INTAKE, and Lint Filters Service ProceduresUpper Shell Removal FANFuel Filter Pump Pressure AdjustmentFuel Valve Nozzle Spark PlugPump Rotor REM200T Illustrated Parts BreakdownDesired part Parts ListWheels and Handle Parts List SpecificationsMaintenance Kits Technical ServiceAccessories Replacement Parts Wiring DiagramRepair Service Warranty ServiceInternational

REM200T specifications

The Desa REM200T is a sophisticated and versatile heating solution designed to provide efficient warmth for various spaces. This model stands out due to its blend of modern technology, user-friendly features, and reliable performance, making it an excellent choice for homeowners and businesses alike.

One of the main features of the Desa REM200T is its exceptional heat output, which can effectively warm rooms of various sizes. With an output capacity of up to 200,000 BTUs, this unit can easily handle larger spaces, ensuring consistent comfort during cold weather. The REM200T is fueled by natural gas or propane, providing users with flexible options depending on their energy preferences and availability.

This heating solution incorporates advanced technologies such as electronic ignition, which ensures reliable start-up and minimizes the need for manual ignitions. The inclusion of a high-efficiency design helps maximize heat output while reducing energy consumption, ultimately lowering utility bills and lessening environmental impact.

Safety is a paramount concern in any heating appliance, and the Desa REM200T does not disappoint in this regard. It comes equipped with multiple safety features including an automatic shut-off system that activates in the event of an overheating situation, as well as a durable construction designed to withstand wear and tear. The unit also features a built-in thermostat, allowing users to maintain their desired temperature effortlessly.

Another notable characteristic of the Desa REM200T is its aesthetically pleasing design. The unit boasts a sleek exterior that can seamlessly fit into various decor styles, making it a practical yet stylish addition to any space. Its compact dimensions ensure that it can be easily installed in a variety of locations, including homes, garages, and workshops.

Ease of use is further enhanced by the user-friendly control panel, which provides straightforward operation and programming options. Whether setting the timer or adjusting the heat output, navigating the controls is simple and intuitive.

In summary, the Desa REM200T offers a powerful and efficient heating solution with a range of features designed for safety, convenience, and performance. Its adaptability to different fuel types, impressive heat output, and modern technologies make it an ideal choice for those seeking reliable warmth in any environment.