Desa B200, REM200, R200 owner manual Pump Rotor, Procedure if Rotor is Binding

Page 11

OWNER’S MANUAL

SERVICE

PROCEDURES

Continued

Nozzle Face

Nozzle Seal

Nozzle

Burner

Head

Fuel

Air Line Line

Fitting Fitting

Figure 16 - Removing Nozzle

PUMP ROTOR

(Procedure if Rotor is Binding)

1.Remove upper shell (see Upper Shell Removal, page 8).

2.Remove filter end cover screws using 5/16" nut-driver.

3.Remove filter end cover and air filters.

4.Remove pump plate screws using 5/16" nut-driver.

5.Remove pump plate.

6.Remove rotor, insert, and blades.

7.Check for debris in pump. If debris is found, blow out with compressed air.

8.Install insert and rotor.

9.Check gap on rotor. Adjust to .003"/.004" if needed (see Figure 18).

Note: Rotate rotor one full turn to insure the gap is .003"/.004" at tightest position. Ad- just if needed.

10.Install blades, pump plate, air filters, and filter end cover.

11.Replace fan guard and upper shell.

12.Adjust pump pressure (see Pump Pres- sure Adjustment, page 8).

Note: If rotor is still binding, proceed as follows.

13.Perform steps 1 through 6 above.

14.Place fine grade sandpaper (600 grit) on flat surface. Sand rotor lightly in “figure 8” motion four times (see Fig- ure 19).

15.Reinstall insert and rotor.

16.Perform steps 10 through 12 above.

Gap Adjusting

.003"/.004" Gap

Screw

Measured With

 

 

 

Feeler Gauge

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rotor

Blade

Gap Adjusting Screw

Figure 18 - Gap Adjusting Screw Locations

Sandpaper

Figure 19 - Sanding Rotor

Insert

Blade Pump

Plate

Air

Intake

Filter Filter End

Cover

Rotor

Air Output Filter

Fan Guard

Figure 17 - Rotor Location

102569

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Portable Forced AIR Heater Portable Forced AIR Heater Safety InformationUnpacking Product IdentificationTools Needed AssemblyFuels VentilationTo Restart Heater Theory OperationTo Start Heater To Stop HeaterHow Often How To Preventative MaintenanceStoring TRANSPORTING, or Shipping ScheduleObserved Fault Possible Cause Remedy TroubleshootingFAN Service ProceduresPump Pressure Adjustment Upper Shell RemovalFuel Valve Fuel FilterNozzle Spark PlugPump Rotor Procedure if Rotor is BindingIllustrated Parts Breakdown Burner Head AssemblyMotor and Pump Assembly KEY Part Number Description QTY Parts ListWheels and Handle Parts List SpecificationsMaintenance Kits Technical ServiceAccessories Replacement Parts Wiring DiagramInternational Limited WarrantyWarranty Service Repair Service

REM200, B200, R200 specifications

Desa B200, REM200, and R200 are innovative models from a prominent manufacturer, showcasing advanced technologies and features designed to meet the needs of modern consumers. These models excel in combining performance, efficiency, and user-friendliness.

The Desa B200 is primarily known for its efficiency and high output functionality. Equipped with a robust engine and cutting-edge fuel technology, this model significantly reduces emissions while maintaining high performance levels. The B200 features an intuitive control interface that allows users to easily manage settings, ensuring optimal performance in a wide range of conditions. This product is ideal for residential and light commercial applications, showcasing versatility that caters to diverse user requirements.

On the other hand, the REM200 stands out with its state-of-the-art remote connectivity features. Users can control and monitor the REM200 from their smartphones through a dedicated application, making it convenient for tech-savvy individuals. The integration of IoT (Internet of Things) technology ensures that users receive real-time updates on performance metrics, enhancing operational efficiency. In addition to its connectivity, the REM200 is equipped with safety features that automatically shut down the unit in case of anomalies, protecting users and ensuring longevity of the device.

The R200 model is designed with a focus on portability and user convenience. Weighing less than conventional models in its category, the R200 offers easy mobility without compromising on performance. Its compact design makes it an excellent choice for outdoor enthusiasts, camping trips, or emergency power supply needs. Additionally, the R200 features a durable build that withstands harsh conditions, ensuring reliability in various environments.

All three models integrate advanced energy efficiency technologies to minimize power consumption, making them eco-friendly choices in today's environmentally conscious market. Their design reflects practical ergonomics, allowing for easy operation and maintenance. Combined, the B200, REM200, and R200 create a product line that not only addresses power generation needs but also aligns with sustainable practices.

In conclusion, the Desa B200, REM200, and R200 each offer unique features catered to different user needs. Together, they represent a commitment to innovation in design and technology, setting a benchmark in the power generation industry. Whether users prioritize efficiency, remote connectivity, or portability, these models cover a comprehensive range of applications, making them desirable options in their respective categories.
Top Page Image Contents